Aerospace / Military
Aerospace Series General Aviation Rod Ends Spherical Bearings Mil Spec Series Rod Ends Spherical Bearings Bushings Approved Part Numbers
Commercial / Industrial
Rod End Bearings Inch Rod Ends Metric Rod Ends Spherical Bearings Inch Spherical Bearings Metric Spherical Bearings
Technical Resources
Terms and Definitions Articles Technical Data FAQs Key Term Translation Custom Engineered Products
Online Catalog
Engineers power search our entire catalog of bearing and bushings, with access to every attribute and technical specification possible. View our online catalog...
Request Information
Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.
Unit of Measure

Key Dimensions

Cup Part Number

 N/A 494-B

O.D. (D)

 N/A 5.5118 in140 mm

Outer Ring Width (C)

 N/A 0.8750 in22.225 mm
e Factor 1 N/A 0.44
K Factor 2 N/A 1.31
Y Factor 3 N/A 1.35

Other Dimensions

Weight

 N/A 1.80 Kg4 lb

Outer Ring Flange O.D.(D1)

 N/A 5.7300 in145.542 mm

Outer Ring Flange Width (C2)

 N/A 0.2188 in5.558 mm
Max Housing Fillet Radius4 N/A 0.12 in3 mm

Housing Backing Shoulder Dia. - Frontface (Da)

 N/A 5.19 in131.83 mm

Factors

Geometry Factor (Cg)5 N/A 0.125
  • 1 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 2 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 4 These maximum fillet radii will be cleared by the bearing corners.
  • 5 Geometry constant for Lubrication Life Adjustment Factor a3l.