Aerospace / Military
Aerospace Series General Aviation Rod Ends Spherical Bearings Mil Spec Series Rod Ends Spherical Bearings Bushings Approved Part Numbers
Commercial / Industrial
Rod End Bearings Inch Rod Ends Metric Rod Ends Spherical Bearings Inch Spherical Bearings Metric Spherical Bearings
Technical Resources
Terms and Definitions Articles Technical Data FAQs Key Term Translation Custom Engineered Products
Online Catalog
Engineers power search our entire catalog of bearing and bushings, with access to every attribute and technical specification possible. View our online catalog...
Request Information
Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.

RELATED PRODUCTS

RELATED PRODUCTS

Unit of Measure

Key Dimensions

Cup Part Number

 N/A L305610-B

O.D. (D)

 N/A 3.1875 in80.963 mm

Outer Ring Width (C)

 N/A 0.5625 in14.288 mm
e Factor 1 N/A 0.36
K Factor 2 N/A 1.64
Y Factor 3 N/A 1.69

Other Dimensions

Weight

 N/A 0.4 Kg0.8 lb

Outer Ring Flange O.D.(D1)

 N/A 3.3085 in84.036 mm

Outer Ring Flange Width (C2)

 N/A 0.125 in3.175 mm
Max Housing Fillet Radius4 N/A 0.06 in1.5 mm

Housing Backing Shoulder Dia. - Frontface (Da)

 N/A 3.11 in78.99 mm

Factors

Geometry Factor (Cg)5 N/A 0.0841
  • 1 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 2 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 4 These maximum fillet radii will be cleared by the bearing corners.
  • 5 Geometry constant for Lubrication Life Adjustment Factor a3l.