Aerospace / Military
Aerospace Series General Aviation Rod Ends Spherical Bearings Mil Spec Series Rod Ends Spherical Bearings Bushings Approved Part Numbers
Commercial / Industrial
Rod End Bearings Inch Rod Ends Metric Rod Ends Spherical Bearings Inch Spherical Bearings Metric Spherical Bearings
Technical Resources
Terms and Definitions Articles Technical Data FAQs Key Term Translation Custom Engineered Products
Online Catalog
Engineers power search our entire catalog of bearing and bushings, with access to every attribute and technical specification possible. View our online catalog...
Request Information
Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.

RELATED PRODUCTS

Unit of Measure

Key Dimensions

Cup Part Number

 N/A JL724314-B

O.D. (D)

 N/A 170 mm6.6929 in

Outer Ring Width (C)

 N/A 19.050 mm0.7500 in
e Factor 1 N/A 0.46
K Factor 2 N/A 1.27
Y Factor 3 N/A 1.31

Other Dimensions

Weight

 N/A 1.9 Kg6.9685 lb

Outer Ring Flange O.D.(D1)

 N/A 177.000 mm6.9685 in

Outer Ring Flange Width (C2)

 N/A 5.000 mm0.1969 in
Max Housing Fillet Radius4 N/A 3.30 mm0.130 in

Housing Backing Shoulder Dia. - Frontface (Da)

 N/A 164.59 mm6.48 in

Factors

Geometry Factor (Cg)5 N/A 0.147
  • 1 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 2 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 4 These maximum fillet radii will be cleared by the bearing corners.
  • 5 Geometry constant for Lubrication Life Adjustment Factor a3l.