Menu
Batch CAD Cart (0) ▾
  • Cart is empty
  1. Click Here for Batch Download
Request Information Add to CAD Cart
The configuration of the TDO provides a wide effective bearing spread, making it ideal for applications in which overturning moments are a significant load component. TDO bearings can be used in fixed positions or allowed to float in the housing bore.
Unit of Measure

Specifications

Series

 N/A 543000

Cone Part Number

 N/A 543085

Cup Part Number

 N/A 543115D

Design Unit

 N/A Inch

Cage Material

 N/A Stamped Steel

Related Assembly Number(s)

 N/A 543085-90011 543085-90018 543085-90024 543085-902A1

Dimensions

d - Bore

 N/A 8.5000 in215.900 mm

D - Cup Outer Diameter

 N/A 11.3125 in287.338 mm

B - Cone Width

 N/A 1.2500 in31.750 mm

C - Double Cup Width

 N/A 2.0000 in50.800 mm

T - Bearing Width across Cones

 N/A 2.7500 in69.850 mm

Abutment and Fillet Dimensions

R - Cone Backface "To Clear" Radius1 N/A 0.14 in3.600 mm
r - Cup Backface "To Clear" Radius2 N/A 0.030 in0.8 mm

db - Cone Backface Backing Diameter

 N/A 9.13 in232 mm

Da - Cup Frontface Backing Diameter

 N/A 10.98 in278.89 mm

Aa - Cage-Cone Backface Clearance

 N/A 0.14 in3.6 mm
a - Effective Center Location3 N/A 0.51 in13 mm

Basic Load Ratings

C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)4 N/A 13900 lbf62000 N
C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)5 N/A 93600 lbf416000 N
C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)6 N/A 24300 lbf108000 N
Ca90 - Dynamic Thrust Rating (90 million revolutions)7 N/A 9190 lbf40900 N

Factors

K - Factor8 N/A 1.52
e - ISO Factor9 N/A 0.39
Y1 - ISO Factor10 N/A 1.75
Y2 - ISO Factor11 N/A 2.61
Cg - Geometry Factor12 N/A 0.113
  • 1 These maximum fillet radii will be cleared by the bearing corners.
  • 2 These maximum fillet radii will be cleared by the bearing corners.
  • 3 Negative value indicates effective center inside cone backface.
  • 4 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
  • 5 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 6 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 7 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 8 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 9 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 10 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 11 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 12 Geometry constant for Lubrication Life Adjustment Factor a3l.
By clicking Submit, you consent to the personal information you provide being used in the manner as described in our Privacy Notice, including access to that information by Timken personnel who may be located outside your home country. In addition, you agree that the CAD drawings are for your personal, one-time use only, and that you will not modify or create any compilation or derivative work using the CAD drawings or distribute or display the CAD drawings on any website or other media.