Montage of Timken Bearing Products
Batch CAD Cart (0) ▾
  • Cart is empty
  1. Click Here for Batch Download
Request Information Add to CAD Cart
The configuration of the TDO provides a wide effective bearing spread, making it ideal for applications in which overturning moments are a significant load component. TDO bearings can be used in fixed positions or allowed to float in the housing bore.
Unit of Measure

Specifications

Series

 N/A 81000

Cone Part Number

 N/A 81593

Cup Part Number

 N/A 81963CD

Design Unit

 N/A Inch

Cage Material

 N/A Stamped Steel

Note

 N/A This part has a non-standard shoulder design. Please email customer CAD for shoulder details to ensure the proper design of mating components.

Related Assembly Number(s)

 N/A 81593-90107

Dimensions

d - Bore

 N/A 5 15/16 in150.813 mm

D - Cup Outer Diameter

 N/A 9.6250 in244.475 mm

B - Cone Width

 N/A 1.9687 in50.005 mm

C - Double Cup Width

 N/A 3.1250 in79.375 mm

T - Bearing Width across Cones

 N/A 4.2500 in107.950 mm

Abutment and Fillet Dimensions

R - Cone Backface "To Clear" Radius1 N/A 0.14 in3.600 mm
r - Cup Backface "To Clear" Radius2 N/A 0.06 in1.5 mm

db - Cone Backface Backing Diameter

 N/A 6.65 in168.9 mm

Da - Cup Frontface Backing Diameter

 N/A 9.06 in229.11 mm

Aa - Cage-Cone Backface Clearance

 N/A 0.31 in7.9 mm
a - Effective Center Location3 N/A -0.21 in-5.3 mm

Basic Load Ratings

C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)4 N/A 23400 lbf104000 N
C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)5 N/A 157000 lbf699000 N
C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)6 N/A 40800 lbf181000 N
Ca90 - Dynamic Thrust Rating (90 million revolutions)7 N/A 14100 lbf62700 N

Factors

K - Factor8 N/A 1.66
e - ISO Factor9 N/A 0.35
Y1 - ISO Factor10 N/A 1.92
Y2 - ISO Factor11 N/A 2.86
Cg - Geometry Factor12 N/A 0.125
  • 1 These maximum fillet radii will be cleared by the bearing corners.
  • 2 These maximum fillet radii will be cleared by the bearing corners.
  • 3 Negative value indicates effective center inside cone backface.
  • 4 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
  • 5 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 6 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 7 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 8 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 9 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 10 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 11 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 12 Geometry constant for Lubrication Life Adjustment Factor a3l.