Menu
Batch CAD Cart (0) ▾
  • Cart is empty
  1. Click Here for Batch Download
Request Information Add to CAD Cart
The configuration of the TDO provides a wide effective bearing spread, making it ideal for applications in which overturning moments are a significant load component. TDO bearings can be used in fixed positions or allowed to float in the housing bore.
Unit of Measure

Specifications

Series

 N/A 128000

Cone Part Number

 N/A EE128111

Cup Part Number

 N/A 128160CD

Design Unit

 N/A Inch

Cage Material

 N/A Stamped Steel

Related Assembly Number(s)

 N/A EE128111-90060 EE128111-90068 EE128111-90069 EE128111-90070 EE128111-90071 EE128111-90072 EE128111-90079 EE128111-902A1 EE128111-902A6 EE128111-902E5

Dimensions

d - Bore

 N/A 11.0312 in280.192 mm

D - Cup Outer Diameter

 N/A 16.0000 in406.400 mm

B - Cone Width

 N/A 2.6643 in67.673 mm

C - Double Cup Width

 N/A 4.6250 in117.475 mm

T - Bearing Width across Cones

 N/A 5.8750 in149.225 mm

Abutment and Fillet Dimensions

R - Cone Backface "To Clear" Radius1 N/A 0.270 in6.900 mm
r - Cup Backface "To Clear" Radius2 N/A 0.06 in1.5 mm

db - Cone Backface Backing Diameter

 N/A 12.17 in309 mm

Da - Cup Frontface Backing Diameter

 N/A 15.13 in384.05 mm

Aa - Cage-Cone Backface Clearance

 N/A 0.29 in7.4 mm
a - Effective Center Location3 N/A 0.26 in6.6 mm

Basic Load Ratings

C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)4 N/A 50600 lbf225000 N
C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)5 N/A 340000 lbf1510000 N
C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)6 N/A 88100 lbf392000 N
Ca90 - Dynamic Thrust Rating (90 million revolutions)7 N/A 33400 lbf149000 N

Factors

K - Factor8 N/A 1.51
e - ISO Factor9 N/A 0.39
Y1 - ISO Factor10 N/A 1.75
Y2 - ISO Factor11 N/A 2.6
Cg - Geometry Factor12 N/A 0.159
  • 1 These maximum fillet radii will be cleared by the bearing corners.
  • 2 These maximum fillet radii will be cleared by the bearing corners.
  • 3 Negative value indicates effective center inside cone backface.
  • 4 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
  • 5 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 6 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 7 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 8 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 9 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 10 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 11 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 12 Geometry constant for Lubrication Life Adjustment Factor a3l.
By clicking Submit, you consent to the personal information you provide being used in the manner as described in our Privacy Notice, including access to that information by Timken personnel who may be located outside your home country. In addition, you agree that the CAD drawings are for your personal, one-time use only, and that you will not modify or create any compilation or derivative work using the CAD drawings or distribute or display the CAD drawings on any website or other media.