Menu
Batch CAD Cart (0) ▾
  • Cart is empty
  1. Click Here for Batch Download
Request Information Add to CAD Cart
The configuration of the TDO provides a wide effective bearing spread, making it ideal for applications in which overturning moments are a significant load component. TDO bearings can be used in fixed positions or allowed to float in the housing bore.
Unit of Measure

Specifications

Series

 N/A 180000

Cone Part Number

 N/A EE181453

Cup Part Number

 N/A 182351D

Design Unit

 N/A Inch

Cage Material

 N/A Pin-Type

Related Assembly Number(s)

 N/A EE181453-90029 EE181453-90037

Dimensions

d - Bore

 N/A 14.5000 in368.3 mm

D - Cup Outer Diameter

 N/A 23.5000 in596.9 mm

B - Cone Width

 N/A 3.6250 in92.075 mm

C - Double Cup Width

 N/A 5.2500 in133.350 mm

T - Bearing Width across Cones

 N/A 7.9999 in203.197 mm

Abutment and Fillet Dimensions

R - Cone Backface "To Clear" Radius1 N/A 0.380 in9.700 mm
r - Cup Backface "To Clear" Radius2 N/A 0.090 in2.3 mm

db - Cone Backface Backing Diameter

 N/A 16.34 in415 mm

Da - Cup Frontface Backing Diameter

 N/A 21.73 in551.90 mm

Aa - Cage-Cone Backface Clearance

 N/A 0.66 in16.8 mm
a - Effective Center Location3 N/A 0.37 in9.4 mm

Basic Load Ratings

C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)4 N/A 103000 lbf460000 N
C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)5 N/A 694000 lbf3090000 N
C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)6 N/A 180000 lbf801000 N
Ca90 - Dynamic Thrust Rating (90 million revolutions)7 N/A 73400 lbf326000 N

Factors

K - Factor8 N/A 1.41
e - ISO Factor9 N/A 0.41
Y1 - ISO Factor10 N/A 1.63
Y2 - ISO Factor11 N/A 2.42
Cg - Geometry Factor12 N/A 0.198
  • 1 These maximum fillet radii will be cleared by the bearing corners.
  • 2 These maximum fillet radii will be cleared by the bearing corners.
  • 3 Negative value indicates effective center inside cone backface.
  • 4 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
  • 5 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 6 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 7 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 8 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 9 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 10 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 11 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 12 Geometry constant for Lubrication Life Adjustment Factor a3l.
By clicking Submit, you consent to the personal information you provide being used in the manner as described in our Privacy Notice, including access to that information by Timken personnel who may be located outside your home country. In addition, you agree that the CAD drawings are for your personal, one-time use only, and that you will not modify or create any compilation or derivative work using the CAD drawings or distribute or display the CAD drawings on any website or other media.