Menu
Batch CAD Cart (0) ▾
  • Cart is empty
  1. Click Here for Batch Download
Request Information Add to CAD Cart
The configuration of the TDO provides a wide effective bearing spread, making it ideal for applications in which overturning moments are a significant load component. TDO bearings can be used in fixed positions or allowed to float in the housing bore.
Unit of Measure

Specifications

Series

 N/A 244000

Cone Part Number

 N/A EE244180

Cup Part Number

 N/A 244236CD

Design Unit

 N/A Inch

Cage Material

 N/A Stamped Steel

Related Assembly Number(s)

 N/A EE244180-90083 EE244180-90084 EE244180-90085 EE244180-90086 EE244180-90087 EE244180-90088 EE244180-90095 EE244180-90096 EE244180-90097 EE244180-90099 EE244180-90100 EE244180-90103 EE244180-90104 EE244180-90105 EE244180-902A4 EE244180-902A6 EE244180-902A7 EE244180-902A8 EE244180-902B1 EE244180-902B2 EE244180-902B3

Dimensions

d - Bore

 N/A 18.0000 in457.200 mm

D - Cup Outer Diameter

 N/A 23.5000 in596.9 mm

B - Cone Width

 N/A 2.875 in73.025 mm

C - Double Cup Width

 N/A 4.7500 in120.650 mm

T - Bearing Width across Cones

 N/A 6.4999 in165.097 mm

Abutment and Fillet Dimensions

R - Cone Backface "To Clear" Radius1 N/A 0.380 in9.700 mm
r - Cup Backface "To Clear" Radius2 N/A 0.06 in1.5 mm

db - Cone Backface Backing Diameter

 N/A 19.45 in494 mm

Da - Cup Frontface Backing Diameter

 N/A 22.48 in570.74 mm

Aa - Cage-Cone Backface Clearance

 N/A 0.49 in12.4 mm
a - Effective Center Location3 N/A 1.05 in26.7 mm

Basic Load Ratings

C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)4 N/A 82400 lbf367000 N
C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)5 N/A 554000 lbf2460000 N
C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)6 N/A 144000 lbf639000 N
Ca90 - Dynamic Thrust Rating (90 million revolutions)7 N/A 57100 lbf254000 N

Factors

K - Factor8 N/A 1.44
e - ISO Factor9 N/A 0.4
Y1 - ISO Factor10 N/A 1.67
Y2 - ISO Factor11 N/A 2.48
Cg - Geometry Factor12 N/A 0.223
  • 1 These maximum fillet radii will be cleared by the bearing corners.
  • 2 These maximum fillet radii will be cleared by the bearing corners.
  • 3 Negative value indicates effective center inside cone backface.
  • 4 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
  • 5 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 6 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 7 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 8 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 9 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 10 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 11 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 12 Geometry constant for Lubrication Life Adjustment Factor a3l.
By clicking Submit, you consent to the personal information you provide being used in the manner as described in our Privacy Notice, including access to that information by Timken personnel who may be located outside your home country. In addition, you agree that the CAD drawings are for your personal, one-time use only, and that you will not modify or create any compilation or derivative work using the CAD drawings or distribute or display the CAD drawings on any website or other media.