Menu
Batch CAD Cart (0) ▾
  • Cart is empty
  1. Click Here for Batch Download
Request Information Add to CAD Cart
The configuration of the TDO provides a wide effective bearing spread, making it ideal for applications in which overturning moments are a significant load component. TDO bearings can be used in fixed positions or allowed to float in the housing bore.
Unit of Measure

Specifications

Series

 N/A 328000

Cone Part Number

 N/A EE328167

Cup Part Number

 N/A 328268D

Design Unit

 N/A Inch

Cage Material

 N/A Pin-Type

Related Assembly Number(s)

 N/A EE328167-90022 EE328167-90024 EE328167-90031 EE328167-902A3 EE328167-902A4

Dimensions

d - Bore

 N/A 16.7500 in425.450 mm

D - Cup Outer Diameter

 N/A 26.9960 in685.698 mm

B - Cone Width

 N/A 5.6220 in142.799 mm

C - Double Cup Width

 N/A 9.2500 in234.950 mm

T - Bearing Width across Cones

 N/A 12.2500 in311.150 mm

Abutment and Fillet Dimensions

R - Cone Backface "To Clear" Radius1 N/A 0.500 in12.700 mm
r - Cup Backface "To Clear" Radius2 N/A 0.130 in3.30 mm

db - Cone Backface Backing Diameter

 N/A 18.98 in482 mm

Da - Cup Frontface Backing Diameter

 N/A 25.07 in636.02 mm

Aa - Cage-Cone Backface Clearance

 N/A 0.8 in20.3 mm
a - Effective Center Location3 N/A -0.32 in-8.1 mm

Basic Load Ratings

C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)4 N/A 812000 N
C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)5 N/A 1230000 lbf5450000 N
C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)6 N/A 318000 lbf1410000 N
Ca90 - Dynamic Thrust Rating (90 million revolutions)7 N/A 126000 lbf559000 N

Factors

K - Factor8 N/A 1.45
e - ISO Factor9 N/A 0.87
Y1 - ISO Factor10 N/A 0.78 1.16
Y2 - ISO Factor11 N/A 1.16
Cg - Geometry Factor12 N/A 0.244
  • 1 These maximum fillet radii will be cleared by the bearing corners.
  • 2 These maximum fillet radii will be cleared by the bearing corners.
  • 3 Negative value indicates effective center inside cone backface.
  • 4 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
  • 5 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 6 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 7 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 8 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 9 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 10 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 11 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 12 Geometry constant for Lubrication Life Adjustment Factor a3l.
By clicking Submit, you consent to the personal information you provide being used in the manner as described in our Privacy Notice, including access to that information by Timken personnel who may be located outside your home country. In addition, you agree that the CAD drawings are for your personal, one-time use only, and that you will not modify or create any compilation or derivative work using the CAD drawings or distribute or display the CAD drawings on any website or other media.