Menu
Batch CAD Cart (0) ▾
  • Cart is empty
  1. Click Here for Batch Download
Request Information Add to CAD Cart
The configuration of the TDO provides a wide effective bearing spread, making it ideal for applications in which overturning moments are a significant load component. TDO bearings can be used in fixed positions or allowed to float in the housing bore.
Unit of Measure

Specifications

Series

 N/A 820000

Cone Part Number

 N/A EE820085

Cup Part Number

 N/A 820161CD

Design Unit

 N/A Inch

Cage Material

 N/A Pin-Type

Related Assembly Number(s)

 N/A EE820085-902A1 EE820085-902A2 EE820085-902A3

Dimensions

d - Bore

 N/A 8 1/2 in215.900 mm

D - Cup Outer Diameter

 N/A 16.0000 in406.400 mm

B - Cone Width

 N/A 3.6875 in93.663 mm

C - Double Cup Width

 N/A 5.8125 in147.638 mm

T - Bearing Width across Cones

 N/A 7.6875 in195.263 mm

Abutment and Fillet Dimensions

R - Cone Backface "To Clear" Radius1 N/A 0.25 in6.4 mm
r - Cup Backface "To Clear" Radius2 N/A 0.06 in1.5 mm

db - Cone Backface Backing Diameter

 N/A 9.88 in251 mm

Da - Cup Frontface Backing Diameter

 N/A 14.69 in372.11 mm

Aa - Cage-Cone Backface Clearance

 N/A 0.38 in9.65 mm
a - Effective Center Location3 N/A -0.49 in-12.4 mm

Basic Load Ratings

C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)4 N/A 85900 lbf382000 N
C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)5 N/A 577000 lbf2560000 N
C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)6 N/A 149000 lbf665000 N
Ca90 - Dynamic Thrust Rating (90 million revolutions)7 N/A 57800 lbf257000 N

Factors

K - Factor8 N/A 1.48
e - ISO Factor9 N/A 0.39
Y1 - ISO Factor10 N/A 1.72
Y2 - ISO Factor11 N/A 2.55
Cg - Geometry Factor12 N/A 0.151
  • 1 These maximum fillet radii will be cleared by the bearing corners.
  • 2 These maximum fillet radii will be cleared by the bearing corners.
  • 3 Negative value indicates effective center inside cone backface.
  • 4 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
  • 5 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 6 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 7 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 8 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 9 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 10 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 11 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 12 Geometry constant for Lubrication Life Adjustment Factor a3l.
By clicking Submit, you consent to the personal information you provide being used in the manner as described in our Privacy Notice, including access to that information by Timken personnel who may be located outside your home country. In addition, you agree that the CAD drawings are for your personal, one-time use only, and that you will not modify or create any compilation or derivative work using the CAD drawings or distribute or display the CAD drawings on any website or other media.