Menu
Batch CAD Cart (0) ▾
  • Cart is empty
  1. Click Here for Batch Download
Request Information Add to CAD Cart
The configuration of the TDO provides a wide effective bearing spread, making it ideal for applications in which overturning moments are a significant load component. TDO bearings can be used in fixed positions or allowed to float in the housing bore.
Unit of Measure

Specifications

Series

 N/A HH924300

Cone Part Number

 N/A HH924349

Cup Part Number

 N/A HH924310D

Design Unit

 N/A Inch

Cage Material

 N/A Stamped Steel

Related Assembly Number(s)

 N/A HH924349-90010 HH924349-90011 HH924349-90013 HH924349-90016 HH924349-90019 HH924349-90021 HH924349-902A1

Dimensions

d - Bore

 N/A 4.3750 in111.125 mm

D - Cup Outer Diameter

 N/A 9.5000 in241.300 mm

B - Cone Width

 N/A 2.8125 in71.438 mm

C - Double Cup Width

 N/A 4.2500 in107.950 mm

T - Bearing Width across Cones

 N/A 6.2500 in158.750 mm

Abutment and Fillet Dimensions

R - Cone Backface "To Clear" Radius1 N/A 0.25 in6.4 mm
r - Cup Backface "To Clear" Radius2 N/A 0.06 in1.5 mm

db - Cone Backface Backing Diameter

 N/A 6.18 in157 mm

Da - Cup Frontface Backing Diameter

 N/A 8.94 in227.08 mm

Aa - Cage-Cone Backface Clearance

 N/A 0.53 in13.5 mm
a - Effective Center Location3 N/A -0.02 in-0.5 mm

Basic Load Ratings

C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)4 N/A 46400 lbf206000 N
C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)5 N/A 311000 lbf1390000 N
C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)6 N/A 80700 lbf359000 N
Ca90 - Dynamic Thrust Rating (90 million revolutions)7 N/A 58100 lbf258000 N

Factors

K - Factor8 N/A 0.8
e - ISO Factor9 N/A 0.73
Y1 - ISO Factor10 N/A 0.92
Y2 - ISO Factor11 N/A 1.37
Cg - Geometry Factor12 N/A 0.143
  • 1 These maximum fillet radii will be cleared by the bearing corners.
  • 2 These maximum fillet radii will be cleared by the bearing corners.
  • 3 Negative value indicates effective center inside cone backface.
  • 4 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
  • 5 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 6 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 7 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 8 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 9 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 10 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 11 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 12 Geometry constant for Lubrication Life Adjustment Factor a3l.
By clicking Submit, you consent to the personal information you provide being used in the manner as described in our Privacy Notice, including access to that information by Timken personnel who may be located outside your home country. In addition, you agree that the CAD drawings are for your personal, one-time use only, and that you will not modify or create any compilation or derivative work using the CAD drawings or distribute or display the CAD drawings on any website or other media.