Montage of Timken Bearing Products
Batch CAD Cart (0) ▾
  • Cart is empty
  1. Click Here for Batch Download
Request Information Add to CAD Cart
The configuration of the TDO provides a wide effective bearing spread, making it ideal for applications in which overturning moments are a significant load component. TDO bearings can be used in fixed positions or allowed to float in the housing bore.
Unit of Measure

Specifications

Series

 N/A HM124600

Cone Part Number

 N/A HM124646

Cup Part Number

 N/A HM124616XD

Design Unit

 N/A Inch

Cage Material

 N/A Stamped Steel

Note

 N/A This part has a non-standard shoulder design. Please email customer CAD for shoulder details to ensure the proper design of mating components.

Dimensions

d - Bore

 N/A 4.6875 in119.063 mm

D - Cup Outer Diameter

 N/A 7.6722 in194.874 mm

B - Cone Width

 N/A 2.2500 in57.150 mm

C - Double Cup Width

 N/A 5.1713 in131.351 mm

T - Bearing Width across Cones

 N/A 4.9312 in125.252 mm

Abutment and Fillet Dimensions

R - Cone Backface "To Clear" Radius1 N/A 0.06 in1.5 mm
r - Cup Backface "To Clear" Radius2 N/A 0.04 in1.0 mm

db - Cone Backface Backing Diameter

 N/A 5.16 in131 mm

Da - Cup Frontface Backing Diameter

 N/A 7.24 in183.90 mm

Aa - Cage-Cone Backface Clearance

 N/A 0.06 in1.5 mm
a - Effective Center Location3 N/A -0.61 in-15.5 mm

Basic Load Ratings

C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)4 N/A 22600 lbf101000 N
C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)5 N/A 152000 lbf675000 N
C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)6 N/A 39300 lbf175000 N
Ca90 - Dynamic Thrust Rating (90 million revolutions)7 N/A 10200 lbf45500 N

Factors

K - Factor8 N/A 2.21
e - ISO Factor9 N/A 0.26
Y1 - ISO Factor10 N/A 2.55
Y2 - ISO Factor11 N/A 3.8
Cg - Geometry Factor12 N/A 0.108
  • 1 These maximum fillet radii will be cleared by the bearing corners.
  • 2 These maximum fillet radii will be cleared by the bearing corners.
  • 3 Negative value indicates effective center inside cone backface.
  • 4 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
  • 5 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 6 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 7 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 8 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 9 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 10 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 11 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 12 Geometry constant for Lubrication Life Adjustment Factor a3l.