Menu
Batch CAD Cart (0) ▾
  • Cart is empty
  1. Click Here for Batch Download
Request Information Add to CAD Cart
The configuration of the TDO provides a wide effective bearing spread, making it ideal for applications in which overturning moments are a significant load component. TDO bearings can be used in fixed positions or allowed to float in the housing bore.
Unit of Measure

Specifications

Series

 N/A LM377400

Cone Part Number

 N/A LM377449

Cup Part Number

 N/A LM377410CD

Design Unit

 N/A Inch

Cage Material

 N/A Pin-Type

Related Assembly Number(s)

 N/A LM377449-902A1 LM377449-902A2 LM377449-902A4 LM377449-902A6 LM377449-902B1 LM377449-902C6 LM377449-902D1 LM377449-902D6 LM377449-902E1 LM377449-903A8

Dimensions

d - Bore

 N/A 22 in558.8 mm

D - Cup Outer Diameter

 N/A 29.0000 in736.600 mm

B - Cone Width

 N/A 4.1250 in104.775 mm

C - Double Cup Width

 N/A 7.0000 in177.800 mm

T - Bearing Width across Cones

 N/A 8.8750 in225.425 mm

Abutment and Fillet Dimensions

R - Cone Backface "To Clear" Radius1 N/A 0.25 in6.4 mm
r - Cup Backface "To Clear" Radius2 N/A 0.06 in1.5 mm

db - Cone Backface Backing Diameter

 N/A 23.39 in594 mm

Da - Cup Frontface Backing Diameter

 N/A 27.96 in710.20 mm

Aa - Cage-Cone Backface Clearance

 N/A 0.27 in6.9 mm
a - Effective Center Location3 N/A 0.62 in15.7 mm

Basic Load Ratings

C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)4 N/A 150000 lbf667000 N
C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)5 N/A 1010000 lbf4480000 N
C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)6 N/A 261000 lbf1160000 N
Ca90 - Dynamic Thrust Rating (90 million revolutions)7 N/A 88800 lbf395000 N

Factors

K - Factor8 N/A 1.69
e - ISO Factor9 N/A 0.35
Y1 - ISO Factor10 N/A 1.95
Y2 - ISO Factor11 N/A 2.9
Cg - Geometry Factor12 N/A 0.273
  • 1 These maximum fillet radii will be cleared by the bearing corners.
  • 2 These maximum fillet radii will be cleared by the bearing corners.
  • 3 Negative value indicates effective center inside cone backface.
  • 4 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
  • 5 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 6 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 7 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 8 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 9 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 10 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 11 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 12 Geometry constant for Lubrication Life Adjustment Factor a3l.
By clicking Submit, you consent to the personal information you provide being used in the manner as described in our Privacy Notice, including access to that information by Timken personnel who may be located outside your home country. In addition, you agree that the CAD drawings are for your personal, one-time use only, and that you will not modify or create any compilation or derivative work using the CAD drawings or distribute or display the CAD drawings on any website or other media.