Menu
Batch CAD Cart (0) ▾
  • Cart is empty
  1. Click Here for Batch Download
Request Information Add to CAD Cart
The configuration of the TDO provides a wide effective bearing spread, making it ideal for applications in which overturning moments are a significant load component. TDO bearings can be used in fixed positions or allowed to float in the housing bore.
Unit of Measure

Specifications

Series

 N/A M272700

Cone Part Number

 N/A M272749

Cup Part Number

 N/A M272710CD

Design Unit

 N/A Inch

Cage Material

 N/A Pin-Type

Related Assembly Number(s)

 N/A M272749-90044 M272749-902B3 M272749-902B7 M272749-902B8 M272749-902B9 M272749-902C2 M272749-902C6 M272749-902C9 M272749-902D3 M272749-902E1 M272749-902E5 M272749-902E6 M272749-902E7 M272749-902E8 M272749-902E9 M272749-902F1 M272749-902F2 M272749-902F3 M272749-902F4 M272749-902F9 M272749-902G2 M272749-902G3 M272749-902G4

Dimensions

d - Bore

 N/A 18.8750 in479.425 mm

D - Cup Outer Diameter

 N/A 26.7500 in679.450 mm

B - Cone Width

 N/A 5.0625 in128.588 mm

C - Double Cup Width

 N/A 8.7500 in222.250 mm

T - Bearing Width across Cones

 N/A 10.8750 in276.225 mm

Abutment and Fillet Dimensions

R - Cone Backface "To Clear" Radius1 N/A 0.25 in6.4 mm
r - Cup Backface "To Clear" Radius2 N/A 0.06 in1.5 mm

db - Cone Backface Backing Diameter

 N/A 20.31 in516 mm

Da - Cup Frontface Backing Diameter

 N/A 25.53 in648.21 mm

Aa - Cage-Cone Backface Clearance

 N/A 0.31 in7.9 mm
a - Effective Center Location3 N/A -0.35 in-8.9 mm

Basic Load Ratings

C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)4 N/A 968000 N
C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)5 N/A 1460000 lbf6500000 N
C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)6 N/A 379000 lbf1680000 N
Ca90 - Dynamic Thrust Rating (90 million revolutions)7 N/A 124000 lbf551000 N

Factors

K - Factor8 N/A 1.76
e - ISO Factor9 N/A 0.7
Y1 - ISO Factor10 N/A 0.97 1.44
Y2 - ISO Factor11 N/A 1.44
Cg - Geometry Factor12 N/A 0.26
  • 1 These maximum fillet radii will be cleared by the bearing corners.
  • 2 These maximum fillet radii will be cleared by the bearing corners.
  • 3 Negative value indicates effective center inside cone backface.
  • 4 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
  • 5 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 6 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 7 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 8 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 9 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 10 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 11 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 12 Geometry constant for Lubrication Life Adjustment Factor a3l.
By clicking Submit, you consent to the personal information you provide being used in the manner as described in our Privacy Notice, including access to that information by Timken personnel who may be located outside your home country. In addition, you agree that the CAD drawings are for your personal, one-time use only, and that you will not modify or create any compilation or derivative work using the CAD drawings or distribute or display the CAD drawings on any website or other media.