Menu
Batch CAD Cart (0) ▾
  • Cart is empty
  1. Click Here for Batch Download
This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.
Unit of Measure

Specifications

Series

 1700

Cone Part Number

 1774

Cup Part Number

 1729X

Design Unit

 Inch

Cage Material

 Stamped Steel

Dimensions

d - Bore

 0.7482 in19.004 mm

D - Cup Outer Diameter

 2.2400 in56.896 mm

B - Cone Width

 0.7810 in19.837 mm

C - Cup Width

 0.6250 in15.875 mm

T - Bearing Width

 0.7625 in19.368 mm

Abutment and Fillet Dimensions

R - Cone Backface "To Clear" Radius1 0.06 in1.5 mm
r - Cup Backface "To Clear" Radius2 0.06 in1.52 mm

da - Cone Frontface Backing Diameter

 0.98 in25 mm

db - Cone Backface Backing Diameter

 1.06 in27 mm

Da - Cup Frontface Backing Diameter

 2.05 in51.10 mm

Db - Cup Backface Backing Diameter

 1.93 in49.02 mm

Ab - Cage-Cone Frontface Clearance

 0.08 in2 mm

Aa - Cage-Cone Backface Clearance

 0.01 in0.3 mm
a - Effective Center Location3 -0.27 in-6.9 mm

Basic Load Ratings

C90 - Dynamic Radial Rating (90 million revolutions)4 2650 lbf11800 N
C1 - Dynamic Radial Rating (1 million revolutions)5 10200 lbf45400 N

C0 - Static Radial Rating

 10200 lbf45300 N
Ca90 - Dynamic Thrust Rating (90 million revolutions)6 1390 lbf6200 N

Factors

K - Factor7 1.9
e - ISO Factor8 0.31
Y - ISO Factor9 1.95
Cg - Geometry Factor10 0.0521
  • 1 These maximum fillet radii will be cleared by the bearing corners.
  • 2 These maximum fillet radii will be cleared by the bearing corners.
  • 3 Negative value indicates effective center inside cone backface.
  • 4 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
  • 5 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 6 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 7 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 8 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 9 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 10 Geometry constant for Lubrication Life Adjustment Factor a3l.