Montage of Timken Bearing Products
Batch CAD Cart (0) ▾
  • Cart is empty
  1. Click Here for Batch Download
Request Information Add to CAD Cart
This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.
Unit of Measure

Specifications

Series

 N/A 168000

Cone Part Number

 N/A EE168400

Cup Part Number

 N/A 168500

Design Unit

 N/A Inch

Cage Material

 N/A Pin-Type

Related Assembly Number(s)

 N/A EE168400-90012 EE168400-90014

Dimensions

d - Bore

 N/A 40.0000 in1016.000 mm

D - Cup Outer Diameter

 N/A 50.0000 in1270.000 mm

B - Cone Width

 N/A 4.0000 in101.600 mm

C - Cup Width

 N/A 2.6250 in66.675 mm

T - Bearing Width

 N/A 4.0000 in101.600 mm

Abutment and Fillet Dimensions

R - Cone Backface "To Clear" Radius1 N/A 0.380 in9.650 mm
r - Cup Backface "To Clear" Radius2 N/A 0.380 in9.65 mm

da - Cone Frontface Backing Diameter

 N/A 41.54 in1055 mm

db - Cone Backface Backing Diameter

 N/A 42.13 in1070 mm

Da - Cup Frontface Backing Diameter

 N/A 50.14 in1273.56 mm

Db - Cup Backface Backing Diameter

 N/A 47.64 in1210.06 mm

Ab - Cage-Cone Frontface Clearance

 N/A 0.17 in4.3 mm

Aa - Cage-Cone Backface Clearance

 N/A 0.63 in16 mm
a - Effective Center Location3 N/A 5.03 in127.8 mm

Basic Load Ratings

C90 - Dynamic Radial Rating (90 million revolutions)4 N/A 166000 lbf738000 N
C1 - Dynamic Radial Rating (1 million revolutions)5 N/A 640000 lbf2840000 N

C0 - Static Radial Rating

 N/A 1800000 lbf8030000 N
Ca90 - Dynamic Thrust Rating (90 million revolutions)6 N/A 140000 lbf622000 N

Factors

K - Factor7 N/A 1.19
e - ISO Factor8 N/A 0.49
Y - ISO Factor9 N/A 1.22

G1 - Heat Generation Factor (Roller-Raceway)

 N/A 22398.3

G2 - Heat Generation Factor (Rib-Roller End)

 N/A 3110.1
Cg - Geometry Factor10 N/A 0.402
  • 1 These maximum fillet radii will be cleared by the bearing corners.
  • 2 These maximum fillet radii will be cleared by the bearing corners.
  • 3 Negative value indicates effective center inside cone backface.
  • 4 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
  • 5 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 6 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 7 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 8 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 9 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 10 Geometry constant for Lubrication Life Adjustment Factor a3l.