Montage of Timken Bearing Products
Batch CAD Cart (0) ▾
  • Cart is empty
  1. Click Here for Batch Download
Request Information Add to CAD Cart
This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.
Unit of Measure

Specifications

Series

 N/A L476500

Cone Part Number

 N/A L476549

Cup Part Number

 N/A L476510

Design Unit

 N/A Inch

Cage Material

 N/A Stamped Steel

Related Assembly Number(s)

 N/A L476549-90010 L476549-90WA1 L476549-90WA5

Dimensions

d - Bore

 N/A 21.6250 in549.275 mm

D - Cup Outer Diameter

 N/A 27.2500 in692.150 mm

B - Cone Width

 N/A 3.1875 in80.963 mm

C - Cup Width

 N/A 2.4375 in61.913 mm

T - Bearing Width

 N/A 3.1875 in80.963 mm

Abutment and Fillet Dimensions

R - Cone Backface "To Clear" Radius1 N/A 0.25 in6.4 mm
r - Cup Backface "To Clear" Radius2 N/A 0.250 in6.35 mm

da - Cone Frontface Backing Diameter

 N/A 22.44 in570 mm

db - Cone Backface Backing Diameter

 N/A 22.8 in579 mm

Da - Cup Frontface Backing Diameter

 N/A 26.34 in666.00 mm

Db - Cup Backface Backing Diameter

 N/A 25.87 in657.10 mm

Ab - Cage-Cone Frontface Clearance

 N/A 0.18 in4.6 mm

Aa - Cage-Cone Backface Clearance

 N/A 0.28 in7.1 mm
a - Effective Center Location3 N/A 1.27 in32.3 mm

Basic Load Ratings

C90 - Dynamic Radial Rating (90 million revolutions)4 N/A 88500 lbf394000 N
C1 - Dynamic Radial Rating (1 million revolutions)5 N/A 342000 lbf1520000 N

C0 - Static Radial Rating

 N/A 892000 lbf3970000 N
Ca90 - Dynamic Thrust Rating (90 million revolutions)6 N/A 57000 lbf254000 N

Factors

K - Factor7 N/A 1.55
e - ISO Factor8 N/A 0.38
Y - ISO Factor9 N/A 1.59

G1 - Heat Generation Factor (Roller-Raceway)

 N/A 7261.6

G2 - Heat Generation Factor (Rib-Roller End)

 N/A 889.8
Cg - Geometry Factor10 N/A 0.257
  • 1 These maximum fillet radii will be cleared by the bearing corners.
  • 2 These maximum fillet radii will be cleared by the bearing corners.
  • 3 Negative value indicates effective center inside cone backface.
  • 4 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
  • 5 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 6 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 7 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 8 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 9 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 10 Geometry constant for Lubrication Life Adjustment Factor a3l.