Montage of Timken Bearing Products
Batch CAD Cart (0) ▾
  • Cart is empty
  1. Click Here for Batch Download
Request Information Add to CAD Cart
This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.
Unit of Measure

Specifications

Series

 N/A LL244500

Cone Part Number

 N/A LL244549

Cup Part Number

 N/A LL244510

Design Unit

 N/A Inch

Cage Material

 N/A Stamped Steel

Related Assembly Number(s)

 N/A LL244549-90022

Dimensions

d - Bore

 N/A 9.1250 in231.775 mm

D - Cup Outer Diameter

 N/A 10.5625 in268.288 mm

B - Cone Width

 N/A 0.8465 in21.501 mm

C - Cup Width

 N/A 0.7283 in18.499 mm

T - Bearing Width

 N/A 0.8858 in22.499 mm

Abutment and Fillet Dimensions

R - Cone Backface "To Clear" Radius1 N/A 0.08 in2.030 mm
r - Cup Backface "To Clear" Radius2 N/A 0.08 in2.03 mm

da - Cone Frontface Backing Diameter

 N/A 9.33 in237 mm

db - Cone Backface Backing Diameter

 N/A 9.49 in241 mm

Da - Cup Frontface Backing Diameter

 N/A 10.38 in263.65 mm

Db - Cup Backface Backing Diameter

 N/A 10.20 in259.08 mm

Ab - Cage-Cone Frontface Clearance

 N/A 0.13 in3.3 mm

Aa - Cage-Cone Backface Clearance

 N/A -0.01 in-0.3 mm
a - Effective Center Location3 N/A 0.62 in15.7 mm

Basic Load Ratings

C90 - Dynamic Radial Rating (90 million revolutions)4 N/A 8520 lbf37900 N
C1 - Dynamic Radial Rating (1 million revolutions)5 N/A 32900 lbf146000 N

C0 - Static Radial Rating

 N/A 78500 lbf349000 N
Ca90 - Dynamic Thrust Rating (90 million revolutions)6 N/A 4850 lbf21600 N

Factors

K - Factor7 N/A 1.76
e - ISO Factor8 N/A 0.33
Y - ISO Factor9 N/A 1.8

G1 - Heat Generation Factor (Roller-Raceway)

 N/A 693.6

G2 - Heat Generation Factor (Rib-Roller End)

 N/A 584.8
Cg - Geometry Factor10 N/A 0.142
  • 1 These maximum fillet radii will be cleared by the bearing corners.
  • 2 These maximum fillet radii will be cleared by the bearing corners.
  • 3 Negative value indicates effective center inside cone backface.
  • 4 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
  • 5 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 6 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 7 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 8 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 9 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 10 Geometry constant for Lubrication Life Adjustment Factor a3l.