Montage of Timken Bearing Products
Batch CAD Cart (0) ▾
  • Cart is empty
  1. Click Here for Batch Download
Request Information Add to CAD Cart
This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.
Unit of Measure

Specifications

Series

 N/A LL889000

Cone Part Number

 N/A LL889049

Cup Part Number

 N/A LL889010

Design Unit

 N/A Inch

Cage Material

 N/A Pin-Type

Related Assembly Number(s)

 N/A LL889049-90015 LL889049-904A2

Dimensions

d - Bore

 N/A 50.0000 in1270.000 mm

D - Cup Outer Diameter

 N/A 56.5000 in1435.100 mm

B - Cone Width

 N/A 2.5625 in65.088 mm

C - Cup Width

 N/A 1.8750 in47.625 mm

T - Bearing Width

 N/A 2.7500 in69.850 mm

Abutment and Fillet Dimensions

R - Cone Backface "To Clear" Radius1 N/A 0.25 in6.4 mm
r - Cup Backface "To Clear" Radius2 N/A 0.250 in6.35 mm

da - Cone Frontface Backing Diameter

 N/A 51.18 in1300 mm

db - Cone Backface Backing Diameter

 N/A 51.38 in1305 mm

Da - Cup Frontface Backing Diameter

 N/A 55.31 in1404.90 mm

Db - Cup Backface Backing Diameter

 N/A 54.92 in1394.97 mm

Ab - Cage-Cone Frontface Clearance

 N/A 0.69 in17.53 mm

Aa - Cage-Cone Backface Clearance

 N/A 0.1 in2.54 mm
a - Effective Center Location3 N/A 8.54 in216.9 mm

Basic Load Ratings

C90 - Dynamic Radial Rating (90 million revolutions)4 N/A 107000 lbf478000 N
C1 - Dynamic Radial Rating (1 million revolutions)5 N/A 414000 lbf1840000 N

C0 - Static Radial Rating

 N/A 1500000 lbf6650000 N
Ca90 - Dynamic Thrust Rating (90 million revolutions)6 N/A 105000 lbf467000 N

Factors

K - Factor7 N/A 1.02
e - ISO Factor8 N/A 0.57
Y - ISO Factor9 N/A 1.05

G1 - Heat Generation Factor (Roller-Raceway)

 N/A 31400

G2 - Heat Generation Factor (Rib-Roller End)

 N/A 5654.9
Cg - Geometry Factor10 N/A 0.464
  • 1 These maximum fillet radii will be cleared by the bearing corners.
  • 2 These maximum fillet radii will be cleared by the bearing corners.
  • 3 Negative value indicates effective center inside cone backface.
  • 4 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
  • 5 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 6 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 7 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 8 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 9 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 10 Geometry constant for Lubrication Life Adjustment Factor a3l.