Menu
Batch CAD Cart (0) ▾
  • Cart is empty
  1. Click Here for Batch Download
This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.
Unit of Measure

Specifications

Series

 M88000

Cone Part Number

 M88048-S

Cup Part Number

 M88010

Design Unit

 Inch

Cage Material

 Stamped Steel

Dimensions

d - Bore

 1 5/16 in33.338 mm

D - Cup Outer Diameter

 2.6875 in68.263 mm

B - Cone Width

 0.875 in22.225 mm

C - Cup Width

 0.6875 in17.463 mm

T - Bearing Width

 0.8750 in22.225 mm

Abutment and Fillet Dimensions

R - Cone Backface "To Clear" Radius1 0.16 in4.1 mm
r - Cup Backface "To Clear" Radius2 0.06 in1.52 mm

da - Cone Frontface Backing Diameter

 1.62 in41.2 mm

db - Cone Backface Backing Diameter

 1.95 in49.5 mm

Da - Cup Frontface Backing Diameter

 2.60 in66.00 mm

Db - Cup Backface Backing Diameter

 2.28 in57.91 mm

Ab - Cage-Cone Frontface Clearance

 0.06 in1.5 mm

Aa - Cage-Cone Backface Clearance

 0.05 in1.3 mm
a - Effective Center Location3 -0.11 in-2.8 mm

Basic Load Ratings

C90 - Dynamic Radial Rating (90 million revolutions)4 4450 lbf19800 N
C1 - Dynamic Radial Rating (1 million revolutions)5 17100 lbf76300 N

C0 - Static Radial Rating

 17400 lbf77400 N
Ca90 - Dynamic Thrust Rating (90 million revolutions)6 4160 lbf18500 N

Factors

K - Factor7 1.07
e - ISO Factor8 0.55
Y - ISO Factor9 1.1
Cg - Geometry Factor10 0.0771
  • 1 These maximum fillet radii will be cleared by the bearing corners.
  • 2 These maximum fillet radii will be cleared by the bearing corners.
  • 3 Negative value indicates effective center inside cone backface.
  • 4 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
  • 5 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 6 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 7 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 8 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 9 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 10 Geometry constant for Lubrication Life Adjustment Factor a3l.