Menu
Batch CAD Cart (0) ▾
  • Cart is empty
  1. Click Here for Batch Download
This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.
Unit of Measure

Specifications

Series

 30218M

Cone Part Number

 X30218M

Cup Part Number

 Y30218M

Design Unit

 Metric

Cage Material

 Stamped Steel

Dimensions

d - Bore

 90 mm3.5433 in

D - Cup Outer Diameter

 160 mm6.2992 in

B - Cone Width

 30.000 mm1.1811 in

C - Cup Width

 26.000 mm1.0236 in

T - Bearing Width

 32.500 mm1.2795 in

Abutment and Fillet Dimensions

R - Cone Backface "To Clear" Radius1 2.540 mm0.1 in
r - Cup Backface "To Clear" Radius2 2.03 mm0.08 in

da - Cone Frontface Backing Diameter

 102 mm4.02 in

db - Cone Backface Backing Diameter

 106 mm4.17 in

Da - Cup Frontface Backing Diameter

 151.90 mm6.00 in

Db - Cup Backface Backing Diameter

 146.05 mm5.75 in

Ab - Cage-Cone Frontface Clearance

 5.6 mm0.22 in

Aa - Cage-Cone Backface Clearance

 0.3 mm0.01 in
a - Effective Center Location3 -0.5 mm-0.02 in

Basic Load Ratings

C90 - Dynamic Radial Rating (90 million revolutions)4 62300 N14000 lbf
C1 - Dynamic Radial Rating (1 million revolutions)5 240000 N54100 lbf

C0 - Static Radial Rating

 295000 N66200 lbf
Ca90 - Dynamic Thrust Rating (90 million revolutions)6 44800 N10100 lbf

Factors

K - Factor7 1.39
e - ISO Factor8 0.42
Y - ISO Factor9 1.43

G1 - Heat Generation Factor (Roller-Raceway)

 125.9

G2 - Heat Generation Factor (Rib-Roller End)

 47.7
Cg - Geometry Factor10 0.0844
  • 1 These maximum fillet radii will be cleared by the bearing corners.
  • 2 These maximum fillet radii will be cleared by the bearing corners.
  • 3 Negative value indicates effective center inside cone backface.
  • 4 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
  • 5 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 6 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 7 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 8 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 9 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 10 Geometry constant for Lubrication Life Adjustment Factor a3l.