Menu
Batch CAD Cart (0) ▾
  • Cart is empty
  1. Click Here for Batch Download
This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.
Unit of Measure

Specifications

Series

 33017

Cone Part Number

 X33017

Cup Part Number

 Y33017

Design Unit

 Metric

Cage Material

 Stamped Steel

Dimensions

d - Bore

 85 mm3.3465 in

D - Cup Outer Diameter

 130 mm5.1181 in

B - Cone Width

 36 mm1.4173 in

C - Cup Width

 29.5 mm1.1614 in

T - Bearing Width

 36 mm1.4173 in

Abutment and Fillet Dimensions

R - Cone Backface "To Clear" Radius1 1.520 mm0.06 in
r - Cup Backface "To Clear" Radius2 1.52 mm0.06 in

da - Cone Frontface Backing Diameter

 93 mm3.66 in

db - Cone Backface Backing Diameter

 96 mm3.78 in

Da - Cup Frontface Backing Diameter

 125.00 mm4.96 in

Db - Cup Backface Backing Diameter

 119.89 mm4.72 in

Ab - Cage-Cone Frontface Clearance

 3.3 mm0.13 in

Aa - Cage-Cone Backface Clearance

 1 mm0.04 in
a - Effective Center Location3 -9.4 mm-0.37 in

Basic Load Ratings

C90 - Dynamic Radial Rating (90 million revolutions)4 57100 N12800 lbf
C1 - Dynamic Radial Rating (1 million revolutions)5 220000 N49500 lbf

C0 - Static Radial Rating

 343000 N77100 lbf
Ca90 - Dynamic Thrust Rating (90 million revolutions)6 28500 N6410 lbf

Factors

K - Factor7 2
e - ISO Factor8 0.29
Y - ISO Factor9 2.06

G1 - Heat Generation Factor (Roller-Raceway)

 157.9

G2 - Heat Generation Factor (Rib-Roller End)

 55.6
Cg - Geometry Factor10 0.0865
  • 1 These maximum fillet radii will be cleared by the bearing corners.
  • 2 These maximum fillet radii will be cleared by the bearing corners.
  • 3 Negative value indicates effective center inside cone backface.
  • 4 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
  • 5 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 6 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 7 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 8 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 9 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 10 Geometry constant for Lubrication Life Adjustment Factor a3l.