Aerospace / Military
Aerospace Series General Aviation Rod Ends Spherical Bearings Mil Spec Series Rod Ends Spherical Bearings Bushings Approved Part Numbers
Commercial / Industrial
Rod End Bearings Inch Rod Ends Metric Rod Ends Spherical Bearings Inch Spherical Bearings Metric Spherical Bearings
Technical Resources
Terms and Definitions Articles Technical Data FAQs Key Term Translation Custom Engineered Products
Online Catalog
Engineers power search our entire catalog of bearing and bushings, with access to every attribute and technical specification possible. View our online catalog...
Request Information
Activated later
Unit of Measure

Key Dimensions

UPC

 N/A 0053893177328

Cone Part Number

 N/A GJP13049

Cup Part Number

 N/A GJP13010

Bore (d)

 N/A 130 mm5.1181 in

O.D. (D)

 N/A 185.000 mm7.2835 in

Width (T)

 N/A 29 mm1.1417 in
Dynamic Radial Load Rating - 1M Revs (C1) 1 N/A 196000 N44000 lbf
Dynamic Radial Load Rating - 90M Revs (C90) 2 N/A 50800 N11400 lbf
e Factor 3 N/A 0.47
K Factor 4 N/A 1.24
Y Factor 5 N/A 1.27

Other Dimensions

Weight

 N/A 2.20 Kg4.8 lb

Inner Ring Width (B)

 N/A 27.000 mm1.0630 in

Outer Ring Width (C)

 N/A 21 mm0.8268 in
Effective Center Location6 N/A 8.9 mm0.35 in
Max Shaft Fillet Radius7 N/A 3.050 mm0.120 in
Max Housing Fillet Radius8 N/A 3.05 mm0.12 in

Shaft Backing Shoulder Dia. - Frontface (da)

 N/A 137 mm5.39 in

Shaft Backing Shoulder Dia. - Backface (db)

 N/A 143 mm5.63 in

Housing Backing Shoulder Dia. - Frontface (Da)

 N/A 179.10 mm7.06 in

Housing Backing Shoulder Dia. - Backface (Db)

 N/A 171.96 mm6.77 in

Cage Location rel. to BF (Aa)

 N/A 1.5 mm0.06 in

Cage Location rel. to FF (Ab)

 N/A 4.8 mm0.19 in

Ratings

Dynamic Axial Rating - 90M Revs (Ca90)9 N/A 41100 N9250 lbf

Static Radial Load Rating (C0)

 N/A 283000 N63600 lbf

Factors

G1 Factor

 N/A 192

G2 Factor

 N/A 60.3
Geometry Factor (Cg)10 N/A 0.106
  • 1 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 2 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
  • 3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 4 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 5 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 6 Negative value indicates effective center inside cone backface.
  • 7 These maximum fillet radii will be cleared by the bearing corners.
  • 8 These maximum fillet radii will be cleared by the bearing corners.
  • 9 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 10 Geometry constant for Lubrication Life Adjustment Factor a3l.