Aerospace / Military
Aerospace Series General Aviation Rod Ends Spherical Bearings Mil Spec Series Rod Ends Spherical Bearings Bushings Approved Part Numbers
Commercial / Industrial
Rod End Bearings Inch Rod Ends Metric Rod Ends Spherical Bearings Inch Spherical Bearings Metric Spherical Bearings
Technical Resources
Terms and Definitions Articles Technical Data FAQs Key Term Translation Custom Engineered Products
Online Catalog
Engineers power search our entire catalog of bearing and bushings, with access to every attribute and technical specification possible. View our online catalog...
Request Information
Activated later
Unit of Measure

Key Dimensions

UPC

 N/A 0053893779591

Cone Part Number

 N/A GJP16049

Cup Part Number

 N/A GJP16010

Bore (d)

 N/A 130 mm5.1181 in

O.D. (D)

 N/A 220 mm8.6614 in

Width (T)

 N/A 32.000 mm1.2598 in
Dynamic Radial Load Rating - 1M Revs (C1) 1 N/A 242000 N54400 lbf
Dynamic Radial Load Rating - 90M Revs (C90) 2 N/A 62700 N14100 lbf
e Factor 3 N/A 0.49
K Factor 4 N/A 1.2
Y Factor 5 N/A 1.23

Other Dimensions

Weight

 N/A 3.1 Kg6.9 lb

Inner Ring Width (B)

 N/A 30.000 mm1.1811 in

Outer Ring Width (C)

 N/A 23.000 mm0.9055 in
Effective Center Location6 N/A 13 mm0.51 in
Max Shaft Fillet Radius7 N/A 3.050 mm0.120 in
Max Housing Fillet Radius8 N/A 3.05 mm0.12 in

Shaft Backing Shoulder Dia. - Frontface (da)

 N/A 169 mm6.65 in

Shaft Backing Shoulder Dia. - Backface (db)

 N/A 174 mm6.85 in

Housing Backing Shoulder Dia. - Frontface (Da)

 N/A 214.10 mm8.43 in

Housing Backing Shoulder Dia. - Backface (Db)

 N/A 205.99 mm8.11 in

Cage Location rel. to BF (Aa)

 N/A 3 mm0.12 in

Cage Location rel. to FF (Ab)

 N/A 4.8 mm0.19 in

Ratings

Dynamic Axial Rating - 90M Revs (Ca90)9 N/A 52200 N11700 lbf

Static Radial Load Rating (C0)

 N/A 372000 N83700 lbf

Factors

G1 Factor

 N/A 294

G2 Factor

 N/A 123.3
Geometry Factor (Cg)10 N/A 0.123
  • 1 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 2 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
  • 3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 4 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 5 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 6 Negative value indicates effective center inside cone backface.
  • 7 These maximum fillet radii will be cleared by the bearing corners.
  • 8 These maximum fillet radii will be cleared by the bearing corners.
  • 9 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 10 Geometry constant for Lubrication Life Adjustment Factor a3l.