Aerospace / Military
Aerospace Series General Aviation Rod Ends Spherical Bearings Mil Spec Series Rod Ends Spherical Bearings Bushings Approved Part Numbers
Commercial / Industrial
Rod End Bearings Inch Rod Ends Metric Rod Ends Spherical Bearings Inch Spherical Bearings Metric Spherical Bearings
Technical Resources
Terms and Definitions Articles Technical Data FAQs Key Term Translation Custom Engineered Products
Online Catalog
Engineers power search our entire catalog of bearing and bushings, with access to every attribute and technical specification possible. View our online catalog...
Request Information
Activated later
Unit of Measure

Key Dimensions

UPC

 N/A 0053893192536

Cone Part Number

 N/A GJP17049

Cup Part Number

 N/A GJP17010

Bore (d)

 N/A 160 mm6.2992 in

O.D. (D)

 N/A 230 mm9.0551 in

Width (T)

 N/A 32.000 mm1.2598 in
Dynamic Radial Load Rating - 1M Revs (C1) 1 N/A 252000 N56700 lbf
Dynamic Radial Load Rating - 90M Revs (C90) 2 N/A 65400 N14700 lbf
e Factor 3 N/A 0.46
K Factor 4 N/A 1.27
Y Factor 5 N/A 1.3

Other Dimensions

Weight

 N/A 3.40 Kg7.60 lb

Inner Ring Width (B)

 N/A 30.000 mm1.1811 in

Outer Ring Width (C)

 N/A 23.000 mm0.9055 in
Effective Center Location6 N/A 13 mm0.51 in
Max Shaft Fillet Radius7 N/A 3.050 mm0.120 in
Max Housing Fillet Radius8 N/A 3.05 mm0.12 in

Shaft Backing Shoulder Dia. - Frontface (da)

 N/A 179 mm7.05 in

Shaft Backing Shoulder Dia. - Backface (db)

 N/A 184 mm7.24 in

Housing Backing Shoulder Dia. - Frontface (Da)

 N/A 223.01 mm8.78 in

Housing Backing Shoulder Dia. - Backface (Db)

 N/A 216.92 mm8.54 in

Cage Location rel. to BF (Aa)

 N/A 2.8 mm0.11 in

Cage Location rel. to FF (Ab)

 N/A 4.8 mm0.19 in

Ratings

Dynamic Axial Rating - 90M Revs (Ca90)9 N/A 51700 N11600 lbf

Static Radial Load Rating (C0)

 N/A 436000 N98100 lbf

Factors

G1 Factor

 N/A 339

G2 Factor

 N/A 147
Geometry Factor (Cg)10 N/A 0.1
  • 1 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 2 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
  • 3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 4 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 5 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 6 Negative value indicates effective center inside cone backface.
  • 7 These maximum fillet radii will be cleared by the bearing corners.
  • 8 These maximum fillet radii will be cleared by the bearing corners.
  • 9 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 10 Geometry constant for Lubrication Life Adjustment Factor a3l.