Montage of Timken Bearing Products 
Search Catalog
        
 All Product Types    Tapered Roller Bearings - TS (Tapered Single) Metric
View Cart View RFQs Express Ordering  | Shipping 
 | Tax 
 | Terms
 Shopping Cart 0 Items
 Request for Quote 0 Items
All Product Types > ENGINEERED BEARINGS > Tapered Roller Bearings > Tapered Roller Bearings - TS (Tapered Single) > Tapered Roller Bearings - TS (Tapered Single) Metric > Part Number JP18049 - JP18010  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites
Add To Cart Request Quote

Part Number JP18049 - JP18010, Tapered Roller Bearings - TS (Tapered Single) Metric


This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.



Unit of Measure: Imperial Metric Both

Specifications  · Dimensions  · Abutment and Fillet Dimensions  · Basic Load Ratings  · Factors

Specifications

Series
JP18000

Cone Part Number
JP18049

Cup Part Number
JP18010

Design Unit
Metric

Cage Material
Stamped Steel

Related Assembly Number(s)
JP18049-90BA1
JP18049-90KA2


Dimensions

d - Bore
180 mm
7.0866 in

D - Cup Outer Diameter
240 mm
9.4488 in

B - Cone Width
30.000 mm
1.1811 in

C - Cup Width
23.000 mm
0.9055 in

T - Bearing Width
32.000 mm
1.2598 in


Abutment and Fillet Dimensions

R - Cone Backface "To Clear" Radius1
3.050 mm
0.12 in

r - Cup Backface "To Clear" Radius2
3.05 mm
0.12 in

da - Cone Frontface Backing Diameter
189 mm
7.44 in

db - Cone Backface Backing Diameter
194 mm
7.64 in

Da - Cup Frontface Backing Diameter
233.68 mm
9.20 in

Db - Cup Backface Backing Diameter
227.08 mm
8.94 in

Ab - Cage-Cone Frontface Clearance
4.8 mm
0.19 in

Aa - Cage-Cone Backface Clearance
2.8 mm
0.11 in

a - Effective Center Location3
16 mm
0.63 in
1 These maximum fillet radii will be cleared by the bearing corners.
2 These maximum fillet radii will be cleared by the bearing corners.
3 Negative value indicates effective center inside cone backface.


Basic Load Ratings

C90 - Dynamic Radial Rating (90 million revolutions)1
61800 N
13900 lbf

C1 - Dynamic Radial Rating (1 million revolutions)2
239000 N
53600 lbf

C0 - Static Radial Rating
409000 N
92000 lbf

Ca90 - Dynamic Thrust Rating (90 million revolutions)3
51300 N
11500 lbf
1 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
2 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
3 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.


Factors

K - Factor1
1.21

e - ISO Factor2
0.48

Y - ISO Factor3
1.24

G1 - Heat Generation Factor (Roller-Raceway)
369.2

G2 - Heat Generation Factor (Rib-Roller End)
161.8

Cg - Geometry Factor4
0.104
1 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
2 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
4 Geometry constant for Lubrication Life Adjustment Factor a3l.



 DOWNLOADS 

Tapered Roller Bearing Engineering Information
(PDF, 663KB)

Bearing Life Calculation Tool

Bearing Dimensional Tolerances


Add To Cart Request Quote
<