Montage of Timken Bearing Products 
Search Catalog
        
 All Product Types    Tapered Roller Bearings - TS (Tapered Single) Metric
View Cart View RFQs Express Ordering  | Shipping 
 | Tax 
 | Terms
 Shopping Cart 0 Items
 Request for Quote 0 Items
All Product Types > ENGINEERED BEARINGS > Tapered Roller Bearings > Tapered Roller Bearings - TS (Tapered Single) > Tapered Roller Bearings - TS (Tapered Single) Metric > Part Number JW7049 - JW7010AX  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites
Add To Cart Request Quote

Part Number JW7049 - JW7010AX, Tapered Roller Bearings - TS (Tapered Single) Metric


This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.



Unit of Measure: Imperial Metric Both

Specifications  · Dimensions  · Abutment and Fillet Dimensions  · Basic Load Ratings  · Factors

Specifications

Series
JW7000

Cone Part Number
JW7049

Cup Part Number
JW7010AX

Design Unit
Metric

Cage Material
Stamped Steel

Related Assembly Number(s)
JW7049-90NB7


Dimensions

d - Bore
70 mm
2.7559 in

D - Cup Outer Diameter
140 mm
5.5118 in

B - Cone Width
35.500 mm
1.3976 in

C - Cup Width
27 mm
1.063 in

T - Bearing Width
39.000 mm
1.5354 in


Abutment and Fillet Dimensions

R - Cone Backface "To Clear" Radius1
3.050 mm
0.12 in

r - Cup Backface "To Clear" Radius2
0.25 mm
0.010 in

da - Cone Frontface Backing Diameter
82 mm
3.23 in

db - Cone Backface Backing Diameter
95 mm
3.74 in

Da - Cup Frontface Backing Diameter
133.35 mm
5.25 in

Db - Cup Backface Backing Diameter
119.13 mm
4.69 in

Ab - Cage-Cone Frontface Clearance
5.3 mm
0.21 in

Aa - Cage-Cone Backface Clearance
4.3 mm
0.17 in

a - Effective Center Location3
8.6 mm
0.34 in
1 These maximum fillet radii will be cleared by the bearing corners.
2 These maximum fillet radii will be cleared by the bearing corners.
3 Negative value indicates effective center inside cone backface.


Basic Load Ratings

C90 - Dynamic Radial Rating (90 million revolutions)1
62600 N
14100 lbf

C1 - Dynamic Radial Rating (1 million revolutions)2
241000 N
54200 lbf

C0 - Static Radial Rating
257000 N
57800 lbf

Ca90 - Dynamic Thrust Rating (90 million revolutions)3
92800 N
20900 lbf
1 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
2 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
3 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.


Factors

K - Factor1
0.67

e - ISO Factor2
0.87

Y - ISO Factor3
0.69

G1 - Heat Generation Factor (Roller-Raceway)
85.2

G2 - Heat Generation Factor (Rib-Roller End)
23.4

Cg - Geometry Factor4
0.0984
1 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
2 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
4 Geometry constant for Lubrication Life Adjustment Factor a3l.



 DOWNLOADS 

Tapered Roller Bearing Engineering Information
(PDF, 663KB)

Bearing Life Calculation Tool

Bearing Dimensional Tolerances


Add To Cart Request Quote
<