Montage of Timken Bearing Products 
Search Catalog
        
 All Product Types    Tapered Roller Bearings - TS (Tapered Single) Metric
View Cart View RFQs Express Ordering  | Shipping 
 | Tax 
 | Terms
 Shopping Cart 0 Items
 Request for Quote 0 Items
All Product Types > ENGINEERED BEARINGS > Tapered Roller Bearings > Tapered Roller Bearings - TS (Tapered Single) > Tapered Roller Bearings - TS (Tapered Single) Metric > Part Number XBA32308-B - Y32308-B  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites
Add To Cart Request Quote

Part Number XBA32308-B - Y32308-B, Tapered Roller Bearings - TS (Tapered Single) Metric


This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.



Unit of Measure: Imperial Metric Both

Specifications  · Dimensions  · Abutment and Fillet Dimensions  · Basic Load Ratings  · Factors

Specifications

Series
32308-B

Cone Part Number
XBA32308-B

Cup Part Number
Y32308-B

Design Unit
Metric

Cage Material
Stamped Steel

Related Assembly Number(s)
XBA32308B-90NA1


Dimensions

d - Bore
40 mm
1.5748 in

D - Cup Outer Diameter
90 mm
3.5433 in

B - Cone Width
33.500 mm
1.3189 in

C - Cup Width
27 mm
1.063 in

T - Bearing Width
35.250 mm
1.3878 in


Abutment and Fillet Dimensions

R - Cone Backface "To Clear" Radius1
2.030 mm
0.08 in

r - Cup Backface "To Clear" Radius2
1.52 mm
0.06 in

da - Cone Frontface Backing Diameter
49 mm
1.93 in

db - Cone Backface Backing Diameter
58 mm
2.28 in

Da - Cup Frontface Backing Diameter
84.10 mm
3.34 in

Db - Cup Backface Backing Diameter
75.95 mm
2.99 in

Ab - Cage-Cone Frontface Clearance
3.3 mm
0.13 in

Aa - Cage-Cone Backface Clearance
2.8 mm
0.11 in

a - Effective Center Location3
-7.4 mm
-0.29 in
1 These maximum fillet radii will be cleared by the bearing corners.
2 These maximum fillet radii will be cleared by the bearing corners.
3 Negative value indicates effective center inside cone backface.


Basic Load Ratings

C90 - Dynamic Radial Rating (90 million revolutions)1
40700 N
9140 lbf

C1 - Dynamic Radial Rating (1 million revolutions)2
157000 N
35300 lbf

C0 - Static Radial Rating
160000 N
36100 lbf

Ca90 - Dynamic Thrust Rating (90 million revolutions)3
38000 N
8540 lbf
1 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
2 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
3 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.


Factors

K - Factor1
1.07

e - ISO Factor2
0.55

Y - ISO Factor3
1.1

G1 - Heat Generation Factor (Roller-Raceway)
38.1

G2 - Heat Generation Factor (Rib-Roller End)
14

Cg - Geometry Factor4
0.0966
1 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
2 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
4 Geometry constant for Lubrication Life Adjustment Factor a3l.



 DOWNLOADS 

Tapered Roller Bearing Engineering Information
(PDF, 663KB)

Bearing Life Calculation Tool

Bearing Dimensional Tolerances


Add To Cart Request Quote
<