Menu
Batch CAD Cart (0) ▾
  • Cart is empty
  1. Click Here for Batch Download
Request Information Add to CAD Cart
Tapered Roller Bearings - TSL (DUO-FACE® Plus Seal) Imperial
Unit of Measure

Specifications

Series

 N/A LM11900

Cone Part Number

 N/A LM11949

Cup Part Number

 N/A LM11910

Seal Part Number

 N/A LM11900EA

Design Unit

 N/A Inch

Cage Material

 N/A Stamped Steel

Dimensions

d - Bore

 N/A 3/4 in19.05 mm

D - Cup Outer Diameter

 N/A 1.7810 in45.237 mm

B - Cone Width

 N/A 0.6550 in16.637 mm

C - Cup Width

 N/A 0.4750 in12.065 mm

T - Bearing Width

 N/A 0.6100 in15.494 mm

T1 - Total Width

 N/A 0.641 in16.281 mm

Abutment and Fillet Dimensions

R - Cone Backface "To Clear" Radius1 N/A 0.050 in1.270 mm
r - Cup Backface "To Clear" Radius2 N/A 0.050 in1.27 mm

da - Cone Frontface Backing Diameter

 N/A 0.93 in23.5 mm

db - Cone Backface Backing Diameter

 N/A 0.98 in25 mm

Da - Cup Frontface Backing Diameter

 N/A 1.65 in41.90 mm

Db - Cup Backface Backing Diameter

 N/A 1.56 in39.62 mm

Ab - Cage-Cone Frontface Clearance

 N/A 0.05 in1.3 mm

Aa - Cage-Cone Backface Clearance

 N/A -0.01 in-0.3 mm
a - Effective Center Location3 N/A -0.22 in-5.6 mm

Basic Load Ratings

C90 - Dynamic Radial Rating (90 million revolutions)4 N/A 2280 lbf10100 N
C1 - Dynamic Radial Rating (1 million revolutions)5 N/A 8800 lbf39100 N

C0 - Static Radial Rating

 N/A 7200 lbf32000 N
Ca90 - Dynamic Thrust Rating (90 million revolutions)6 N/A 1170 lbf5220 N

Factors

K - Factor7 N/A 1.94
e - ISO Factor8 N/A 0.3
Y - ISO Factor9 N/A 2
Y1 - ISO Factor10 N/A 2.25
Y2 - ISO Factor11 N/A 3.34

G1 - Heat Generation Factor (Roller-Raceway)

 N/A 6.6

G2 - Heat Generation Factor (Rib-Roller End)

 N/A 5.49
Cg - Geometry Factor12 N/A 0.0441
  • 1 These maximum fillet radii will be cleared by the bearing corners.
  • 2 These maximum fillet radii will be cleared by the bearing corners.
  • 3 Negative value indicates effective center inside cone backface.
  • 4 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
  • 5 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 6 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 7 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 8 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 9 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 10 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 11 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 12 Geometry constant for Lubrication Life Adjustment Factor a3l.
By clicking Submit, you consent to the personal information you provide being used in the manner as described in our Privacy Notice, including access to that information by Timken personnel who may be located outside your home country. In addition, you agree that the CAD drawings are for your personal, one-time use only, and that you will not modify or create any compilation or derivative work using the CAD drawings or distribute or display the CAD drawings on any website or other media.