All Product Types > ENGINEERED BEARINGS > Tapered Roller Bearings > Tapered Roller Bearings - TSL (DUO-FACE® Plus Seal) Imperial > Part Number LM67048 - LM67010 (LM67000LA)  

Part Number LM67048 - LM67010 (LM67000LA), Tapered Roller Bearings - TSL (DUO-FACE® Plus Seal) Imperial

    Download PDF Download PDF   
    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  

Tapered Roller Bearings - TSL (DUO-FACE® Plus Seal) Imperial




Specifications  · Dimensions  · Abutment and Fillet Dimensions  · Basic Load Ratings  · Factors

Specifications

Series
LM67000

Cone Part Number
LM67048

Cup Part Number
LM67010

Seal Part Number
LM67000LA

Design Unit
Inch

Cage Material
Stamped Steel


Dimensions

d - Bore
1 1/4 in
31.750 mm

D - Cup Outer Diameter
2.3280 in
59.131 mm

B - Cone Width
0.6600 in
16.764 mm

C - Cup Width
0.4650 in
11.811 mm

T - Bearing Width
0.6250 in
15.875 mm

T1 - Total Width
0.7 in
17.78 mm


Abutment and Fillet Dimensions

R - Cone Backface "To Clear" Radius1
0.14 in
3.600 mm

r - Cup Backface "To Clear" Radius2
0.050 in
1.27 mm

da - Cone Frontface Backing Diameter
1.42 in
36 mm

db - Cone Backface Backing Diameter
1.67 in
42.5 mm

Da - Cup Frontface Backing Diameter
2.24 in
55.90 mm

Db - Cup Backface Backing Diameter
2.05 in
52.07 mm

Ab - Cage-Cone Frontface Clearance
0.05 in
1.3 mm

Aa - Cage-Cone Backface Clearance
0.01 in
0.3 mm

a - Effective Center Location3
-0.12 in
-3 mm
1 These maximum fillet radii will be cleared by the bearing corners.
2 These maximum fillet radii will be cleared by the bearing corners.
3 Negative value indicates effective center inside cone backface.


Basic Load Ratings

C90 - Dynamic Radial Rating (90 million revolutions)1
2720 lbf
12100 N

C1 - Dynamic Radial Rating (1 million revolutions)2
10500 lbf
46700 N

C0 - Static Radial Rating
10000 lbf
44600 N

Ca90 - Dynamic Thrust Rating (90 million revolutions)3
1920 lbf
8550 N
1 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
2 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
3 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.


Factors

K - Factor1
1.42

e - ISO Factor2
0.41

Y - ISO Factor3
1.46

Y1 - ISO Factor4
1.64

Y2 - ISO Factor5
2.44

G1 - Heat Generation Factor (Roller-Raceway)
12.8

G2 - Heat Generation Factor (Rib-Roller End)
9.93

Cg - Geometry Factor6
0.0612
1 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
2 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
4 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
5 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
6 Geometry constant for Lubrication Life Adjustment Factor a3l.


 MORE IMAGES 

·  timken-TSL-cutaway-angle-view

·  timken-TSL-left-angle-view

·  Timken TRB TSL



 DOWNLOADS 

Tapered Roller Bearing Engineering Information
(PDF, 663KB)

Bearing Life Calculation Tool

Bearing Dimensional Tolerances