Aerospace / Military
Aerospace Series General Aviation Rod Ends Spherical Bearings Mil Spec Series Rod Ends Spherical Bearings Bushings Approved Part Numbers
Commercial / Industrial
Rod End Bearings Inch Rod Ends Metric Rod Ends Spherical Bearings Inch Spherical Bearings Metric Spherical Bearings
Technical Resources
Terms and Definitions Articles Technical Data FAQs Key Term Translation Custom Engineered Products
Online Catalog
Engineers power search our entire catalog of bearing and bushings, with access to every attribute and technical specification possible. View our online catalog...
Request Information
TDI bearings have a one-piece double inner race and two single outer races and are typically supplied complete with an outer race spacer as a pre-set assembly. The bearing can be used at fixed positions on rotation shaft applications. For rotating housing application it can be used to float on the stationary shaft.

RELATED PRODUCTS

RELATED PRODUCTS

RELATED PRODUCTS

RELATED PRODUCTS

Unit of Measure

Key Dimensions

UPC

 N/A 0053893079912

Cone Part Number

 N/A 688TD

Bore (d)

 N/A 3.9453 in100.211 mm
Dynamic Radial Load Rating - 1M Revs (C1) 1 N/A 56200 lbf250000 N
Dynamic Radial Load Rating - 90M Revs (C90) 2 N/A 14600 lbf64800 N
Dynamic Radial Load Rating 2-Row - 90M Revs (C90-2row) 3 N/A 25400 lbf113000 N
K Factor 4 N/A 1.24

Other Dimensions

Weight

 N/A 8 Kg17.7 lb

Inner Ring Width (B)

 N/A 3.7500 in95.250 mm
Max Shaft Fillet Radius5 N/A 0.030 in0.8 mm

Shaft Backing Shoulder Dia. - Frontface (da)

 N/A 4.45 in113 mm

Cage Location rel. to FF (Ab)

 N/A 0.12 in3 mm

Ratings

Dynamic Axial Rating - 90M Revs (Ca90)6 N/A 11700 lbf52200 N
Dynamic Radial Load Rating 2-Row - 1M Revs (C1)7 N/A 97800 lbf435000 N

Static Radial Load Rating (C0)

 N/A 86700 lbf386000 N

Factors

Geometry Factor (Cg)8 N/A 0.106
  • 1 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 2 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
  • 3 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 4 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 5 These maximum fillet radii will be cleared by the bearing corners.
  • 6 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 7 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 8 Geometry constant for Lubrication Life Adjustment Factor a3l.