Menu
Batch CAD Cart (0) ▾
  • Cart is empty
  1. Click Here for Batch Download
Request Information Add to CAD Cart

●   UCP pillow blocks are suggested for industrial applications where normal loads are encountered.
●   Compact, one-piece housing with two-bolt mounting can be installed in any position and makes bearing replacement easy.
●   These units use wide inner ring ball bearings with self-aligning spherical outside diameters that compensate for shaft misalignment.
●   Timken UCP series Mounted Bearings feature the Timken set screw locking (UC) bearing insert.
●   Bearing prelubricated and ready for immediate installation.
●   Grease fitting supplied for relubrication.
●   The bonded seal design is well-suited for applications involving wet or dirty environments.
●   Bolt-hole spacing and base-to-center height dimensions are interchangeable with competitive units.
●   Housing designed for ease of bearing replacement.
Unit of Measure

Specifications

Bore Size

 N/A 35 mm

Seal Type

 N/A IP69K Seal

Housing Material

 N/A Hygienic Stainless Steel

Bearing Number

 N/A SUC207-IP69K/FVSL613

Lubrication Type

 N/A Food Grade Solid Lube

Locking Style

 N/A Set Screw Locking

Housing Construction

 N/A Tapped Base

Dimensions

Housing Width A

 N/A 1.470 in37.3 mm

Total Length L

 N/A 4.250 in108.0 mm

Total Height H2

 N/A 3.690 in93.7 mm

Thread Length H3

 N/A 0.752 in19.1 mm

Bolt Hole Spacing J

 N/A 3.250 in82.6 mm

Base to Center Height H

 N/A 1.875 in47.6 mm

Center of Bearing from Bearing End S

 N/A 0.689 in17.5 mm

Inner Ring Width B

 N/A 1.689 in42.9 mm

Basic Load Ratings

Dynamic Load Rating

 N/A 4901 lbf21800 N

Static Load Rating

 N/A 2766 lbf12300 N
By clicking Submit, you consent to the personal information you provide being used in the manner as described in our Privacy Notice, including access to that information by Timken personnel who may be located outside your home country. In addition, you agree that the CAD drawings are for your personal, one-time use only, and that you will not modify or create any compilation or derivative work using the CAD drawings or distribute or display the CAD drawings on any website or other media.