Menu
Batch CAD Cart (0) ▾
  • Cart is empty
  1. Click Here for Batch Download
Request Information Add to CAD Cart

●   UCP pillow blocks are suggested for industrial applications where normal loads are encountered.
●   Compact, one-piece housing with two-bolt mounting can be installed in any position and makes bearing replacement easy.
●   These units use wide inner ring ball bearings with self-aligning spherical outside diameters that compensate for shaft misalignment.
●   Timken UCP series Mounted Bearings feature the Timken set screw locking (UC) bearing insert.
●   Bearing prelubricated and ready for immediate installation.
●   Grease fitting supplied for relubrication.
●   The bonded seal design is well-suited for applications involving wet or dirty environments.
●   Bolt-hole spacing and base-to-center height dimensions are interchangeable with competitive units.
●   Housing designed for ease of bearing replacement.
Unit of Measure

Specifications

Bore Size

 N/A 30 mm

Seal Type

 N/A IP69K Seal

Housing Material

 N/A Cast Stainless Steel

Bearing Number

 N/A SUC206-IP69K/F

Lubrication Type

 N/A Standard Food Safe Grease

Locking Style

 N/A Set Screw Locking

Housing Construction

 N/A Tapped Base

Bearing Style

 N/A Ball Bearing

Dimensions

Housing Width A

 N/A 1.470 in37.3 mm

Total Length L

 N/A 4.000 in101.6 mm

Total Height H2

 N/A 3.250 in82.6 mm

Thread Length H3

 N/A 0.709 in18.0 mm

Bolt Hole Spacing J

 N/A 3.000 in76.2 mm

Dimension L1

 N/A 0.000 in0.0 mm

Base to Center Height H

 N/A 1.688 in42.9 mm

Foot Height H1

 N/A 0.000 in0.0 mm

Center of Bearing from Bearing End S

 N/A 0.626 in15.9 mm

Inner Ring Width B

 N/A 1.500 in38.1 mm

Basic Load Ratings

Dynamic Load Rating

 N/A 3710 lbf16500 N

Static Load Rating

 N/A 2035 lbf9050 N
By clicking Submit, you consent to the personal information you provide being used in the manner as described in our Privacy Notice, including access to that information by Timken personnel who may be located outside your home country. In addition, you agree that the CAD drawings are for your personal, one-time use only, and that you will not modify or create any compilation or derivative work using the CAD drawings or distribute or display the CAD drawings on any website or other media.