Aerospace / Military
Aerospace Series General Aviation Rod Ends Spherical Bearings Mil Spec Series Rod Ends Spherical Bearings Bushings Approved Part Numbers
Commercial / Industrial
Rod End Bearings Inch Rod Ends Metric Rod Ends Spherical Bearings Inch Spherical Bearings Metric Spherical Bearings
Technical Resources
Terms and Definitions Articles Technical Data FAQs Key Term Translation Custom Engineered Products
Online Catalog
Engineers power search our entire catalog of bearing and bushings, with access to every attribute and technical specification possible. View our online catalog...
Request Information
This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.
Unit of Measure

Key Dimensions

Cone Part Number

 N/A 479

Cup Part Number

 N/A 472A

Bore (d)

 N/A 2.6250 in66.675 mm

O.D. (D)

 N/A 4.7244 in120 mm

Width (T)

 N/A 1.1418 in29.002 mm
Dynamic Radial Load Rating - 90M Revs (C90) 1 N/A 8360 lbf37200 N
Dynamic Radial Load Rating - 1M Revs (C1) 2 N/A 32200 lbf143000 N
e Factor 3 N/A 0.38
Y Factor 4 N/A 1.56
K Factor 5 N/A 1.52

Other Dimensions

Weight

 N/A 3.08 lb1.41 Kg

Inner Ring Width (B)

 N/A 1.1420 in29.007 mm

Outer Ring Width (C)

 N/A 0.9230 in23.444 mm

Total Width (T1)

 N/A 1.2720 in32.418 mm
Effective Center Location6 N/A -0.16 in-4.1 mm
Max Shaft Fillet Radius7 N/A 0.09 in2.3 mm
Max Housing Fillet Radius8 N/A 0.130 in3.30 mm

Shaft Backing Shoulder Dia. - Frontface (da)

 N/A 2.91 in74 mm

Shaft Backing Shoulder Dia. - Backface (db)

 N/A 3.07 in78 mm

Housing Backing Shoulder Dia. - Backface (Db)

 N/A 4.17 in105.92 mm

Ratings

Dynamic Axial Rating - 90M Revs (Ca90)9 N/A 5500 lbf24500 N

Static Radial Load Rating (C0)

 N/A 41900 lbf186000 N

Factors

Y1 Factor 10 N/A 1.75
Y2 Factor 11 N/A 2.61

G1 Factor

 N/A 77.2

G2 Factor

 N/A 23
Geometry Factor (Cg)12 N/A 0.108
  • 1 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
  • 2 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 4 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 5 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 6 Negative value indicates effective center inside cone backface.
  • 7 These maximum fillet radii will be cleared by the bearing corners.
  • 8 These maximum fillet radii will be cleared by the bearing corners.
  • 9 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 10 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 11 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 12 Geometry constant for Lubrication Life Adjustment Factor a3l.