Aerospace / Military
Aerospace Series General Aviation Rod Ends Spherical Bearings Mil Spec Series Rod Ends Spherical Bearings Bushings Approved Part Numbers
Commercial / Industrial
Rod End Bearings Inch Rod Ends Metric Rod Ends Spherical Bearings Inch Spherical Bearings Metric Spherical Bearings
Technical Resources
Terms and Definitions Articles Technical Data FAQs Key Term Translation Custom Engineered Products
Online Catalog
Engineers power search our entire catalog of bearing and bushings, with access to every attribute and technical specification possible. View our online catalog...
Request Information
This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.
Unit of Measure

Key Dimensions

Cone Part Number

 N/A M12649

Cup Part Number

 N/A M12610

Seal Part Number

 N/A M12600LA

Bore (d)

 N/A 0.8437 in21.430 mm

O.D. (D)

 N/A 1.9687 in50.005 mm

Width (T)

 N/A 0.69 in17.526 mm
Dynamic Radial Load Rating - 90M Revs (C90) 1 N/A 3040 lbf13500 N
Dynamic Radial Load Rating - 1M Revs (C1) 2 N/A 11700 lbf52200 N
e Factor 3 N/A 0.28
Y Factor 4 N/A 2.16
K Factor 5 N/A 2.1

Other Dimensions

Weight

 N/A 0.37 lb0.17 Kg

Inner Ring Width (B)

 N/A 0.7200 in18.288 mm

Outer Ring Width (C)

 N/A 0.5500 in13.970 mm

Total Width (T1)

 N/A 0.765 in19.43 mm
Effective Center Location6 N/A -0.25 in-6.4 mm
Max Shaft Fillet Radius7 N/A 0.050 in1.270 mm
Max Housing Fillet Radius8 N/A 0.050 in1.27 mm

Shaft Backing Shoulder Dia. - Frontface (da)

 N/A 1.08 in27.5 mm

Shaft Backing Shoulder Dia. - Backface (db)

 N/A 1.16 in29.5 mm

Housing Backing Shoulder Dia. - Frontface (Da)

 N/A 1.83 in46.48 mm

Housing Backing Shoulder Dia. - Backface (Db)

 N/A 1.73 in43.94 mm

Cage Location rel. to BF (Aa)

 N/A 0.07 in1.8 mm

Cage Location rel. to FF (Ab)

 N/A -0.01 in-0.3 mm

Ratings

Dynamic Axial Rating - 90M Revs (Ca90)9 N/A 1450 lbf6440 N

Static Radial Load Rating (C0)

 N/A 9780 lbf43500 N

Factors

Y1 Factor 10 N/A 2.43
Y2 Factor 11 N/A 3.61

G1 Factor

 N/A 9.1

G2 Factor

 N/A 5.63
Geometry Factor (Cg)12 N/A 0.0479
  • 1 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
  • 2 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 4 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 5 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 6 Negative value indicates effective center inside cone backface.
  • 7 These maximum fillet radii will be cleared by the bearing corners.
  • 8 These maximum fillet radii will be cleared by the bearing corners.
  • 9 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 10 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 11 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 12 Geometry constant for Lubrication Life Adjustment Factor a3l.