PTFE Liner - (AT 3200) Permanently bonded to race inside diameter, qualified to SAE-AS81820 Type A.
Temperature range: -65°F to +325°F.
No load rotational breakaway torque can be varied to meet specific application requirements.
Keyslots are available. Units are supplied without keyslots. When a keyslot is required, specify by adding suffix "K". Ex.: ASWK-3T.
As applicable, keyslots will conform to SAE-AS81935/3 or NAS 559.
Rod End Bearings listed are manufactured to conform to the dimensions, materials, and configurations of SAE-AS81935/2, and are approved for procurement under this specification.
Unit of Measure
Specifications
Part Number
N/AASW-5T
SAE Part Number
N/AM81935/2-05
Thread Type
N/ARight Hand
Thread Configuration
N/AFemale
B - Ball Bore
N/A.3125 in
W - Ball Width
N/A.437 in
H - Head Width
N/A.327 in
A - Base to Center
N/A1.625 in
D - Head Diameter
N/A.900 in
O - Ball Shoulder Diameter
N/A.36 in
S - Max. Housing I.D.
N/A.6875 in
E - Diameter
N/A.485 in
K - Boss Diameter
N/A.580 in
J - Wrench Flat Width
N/A.500 in
F - Boss Height
N/A.250 in
Ball Diameter
N/A.593 in
P - Drilled Hole Depth
N/A1.000 in
C - Thread Depth [inch]
N/A.875 in
Thread Size
N/A3/8-24
Thread Class
N/AUNJF-3B
a - Misalignment Angle
N/A14 º
Approximate Brg. Weight
N/A.102 lb
Ultimate Radial Static Load Capacity
N/A7,180 lbs
Fatique Load
N/A3,020 lb
Axial Proof Load
N/A1,100 lb
No Load Rotational Breakaway Torque
N/A1 to 15 in·lb
Note
N/AFor dimensional tolerances of listed features, see the PDF version of the catalog under the "View Product Catalogs" tab from the home page.
