PTFE Liner - (AT 3200) Permanently bonded to race inside diameter, qualified to SAE-AS81820 Type A.
Temperature range: -65°F to +325°F
No load rotational breakaway torque can be varied to meet specific application requirements.
Keyways are available. Units are supplied without keyways. When a keyway is required, specify by adding suffix "K". Ex.: ASMK-3T.
As applicable, keyways will conform to SAE-AS81935/3 or NAS 559.
All threads are rolled after heat treatment, and conform to UNJF-3A per AS8879.
Rod End Bearings listed are manufactured to conform to the dimensions, materials, and configurations of SAE-AS81935/6, and are approved for procurement under this specification.
Unit of Measure
Specifications
Part Number
N/AASMK-5ETC
SAE Part Number
N/AM81935/6-05CK
Thread Type
N/ARight Hand
Thread Configuration
N/AMale
B - Ball Bore
N/A.3125 in
W - Ball Width
N/A.437 in
H - Head Width
N/A.327 in
A - Base to Center
N/A1.875 in
D - Head Diameter
N/A.900 in
O - Ball Shoulder Diameter
N/A.360 in
S - Max. Housing I.D.
N/A.6875 in
Ball Diameter
N/A.593 in
G - Base to Center of Keyway Radius
N/A1.270 in
K - Keyway Width
N/A.062 in
P - Keyway Depth
N/A.268 in
C - Thread Length
N/A1.187 in
Thread Size
N/A5/16-24
Thread Class
N/AUNJF-3A
a - Misalignment Angle
N/A14 º
Approximate Brg. Weight
N/A.087 lb
Ultimate Radial Static Load Capacity
N/A7,180 lb
Fatique Load
N/A2,770 lb
Axial Proof Load
N/A1,100 lb
No Load Rotational Breakaway Torque
N/A1 to 15 in·lb
Keyway
N/AKeyway
Note
N/AFor dimensional tolerances of listed features, see the PDF version of the catalog under the "View Product Catalogs" tab from the home page.
