Part Number ASG-4ETC, Aurora Bearing ASW-ET & ASG-ET Female Rod Ends SAE Series AS81935/7 (Right Hand) & AS81935/7 (Left Hand) On The Timken Company

Batch CAD Cart (0) ▾

Request Information Add to CAD Cart

Body - PH 13-8 Mo stainless steel per AMS 5629 - heat treated.
Ball - 440C stainless steel per AMS 5630 - heat treated.
Optional Ball - 13-8 Mo stainless steel per AMS 5629 - heat treated. (Specify by adding suffix "C" ex.: ASW-3ETC)
Race - 17-4 PH stainless steel per AMS 5643 - heat treated.
PTFE Liner - (AT 3200) Permanently bonded to race inside diameter, qualified to SAE-AS81820 Type A.
Temperature range: -65°F to +325°F.
No load rotational breakaway torque can be varied to meet specific application requirements.
Keyslots are available. Units are supplied without keyslots. When a keyslot is required, specify by adding suffix "K". Ex.: ASWK-3ET.
As applicable, keyslots will conform to SAE-AS81935/3 or NAS 559.
Rod End Bearings listed are manufactured to conform to the dimensions, materials, and configurations of SAE-AS81935/7, and are approved for procurement under this specification.

Unit of Measure

Part Number	N/A ASG-4ETC
SAE Part Number	N/A M81935/7-04CL
Thread Type	N/A Left Hand
Thread Configuration	N/A Female
B - Ball Bore	N/A .2500 in
W - Ball Width	N/A .437 in
H - Head Width	N/A .337 in
A - Base to Center	N/A 1.469 in
D - Head Diameter	N/A .806 in
O - Ball Shoulder Diameter	N/A .300 in
S - Max. Housing I.D.	N/A .6250 in
E - Diameter	N/A .422 in
K - Boss Diameter	N/A .500 in
J - Wrench Flat Width	N/A .437 in
F - Boss Height	N/A .188 in
Ball Diameter	N/A .531 in
P - Drilled Hole Depth	N/A .875 in
C - Thread Depth [inch]	N/A .750 in
Thread Size	N/A 5/16-24
Thread Class	N/A UNJF-3B-LH
a - Misalignment Angle	N/A 15 º
Approximate Brg. Weight	N/A .084 lb
Ultimate Radial Static Load Capacity	N/A 4,860 lb
Fatique Load	N/A 2,380 lb
Axial Proof Load	N/A 1,000 lb
No Load Rotational Breakaway Torque	N/A .5 to 6 in·lb
Note	N/A For dimensional tolerances of listed features, see the PDF version of the catalog under the "View Product Catalogs" tab from the home page.

Part Number