Aerospace / Military
Aerospace Series General Aviation Rod Ends Spherical Bearings Mil Spec Series Rod Ends Spherical Bearings Bushings Approved Part Numbers
Commercial / Industrial
Rod End Bearings Inch Rod Ends Metric Rod Ends Spherical Bearings Inch Spherical Bearings Metric Spherical Bearings
Technical Resources
Terms and Definitions Articles Technical Data FAQs Key Term Translation Custom Engineered Products
Online Catalog
Engineers power search our entire catalog of bearing and bushings, with access to every attribute and technical specification possible. View our online catalog...
Request Information

Effective August 21st, 2023, the Naval Air Warfare Center Aircraft Division (NAWCAD) has disapproved Timken Aurora’s qualification status for SAE-AS81820 and SAE-AS81935 specifications. Timken Aurora is working diligently to get requalified.

  • Body - PH 13-8 Mo stainless steel per AMS 5629 - heat treated.
  • Ball - 440C stainless steel per AMS 5630 - heat treated.
  • Optional Ball - 13-8 Mo stainless steel per AMS 5629 - heat treated. (Specify by adding suffix "C" ex.: ATM-3ETC)
  • Race - 17-4 PH stainless steel per AMS 5643 - heat treated.
  • PTFE Liner - (AT 3200) Permanently bonded to race inside diameter, qualified to SAE-AS81820 Type A.
  • Temperature range: -65°F to +325°F
  • No load rotational breakaway torque can be varied to meet specific application requirements.
  • Keyways are available. Units are supplied without keyways. When a keyway is required, specify by adding suffix "K". Ex.: ATMK-3T.
  • As applicable, keyways will conform to SAE-AS81935/3 or NAS 559.
  • All threads are rolled after heat treatment, and conform to UNJF-3A per AS8879.
  • Rod End Bearings listed are manufactured to conform to the dimensions, materials, and configurations of SAE-AS81935/8, and are approved for procurement under this specification.
Unit of Measure

Key Dimensions

Part Number

 N/A ATB-16ET

SAE Part Number

N/A M81935/8-16L

Thread Type

 N/A Left Hand

Thread Configuration

 N/A Male

B - Ball Bore

 N/A 1.0000 in

W - Ball Width

 N/A 1.000 in

H - Head Width

 N/A .807 in

A - Base to Center

 N/A 3.968 in

D - Head Diameter

 N/A 2.681 in

O - Ball Shoulder Diameter

 N/A 1.118 in

S - Max. Housing I.D.

 N/A 1.7500 in

Ball Diameter

 N/A 1.500 in

C - Thread Length

 N/A 2.100 in

Thread Size

 N/A 1-12

Thread Class

 N/A UNJF-3A-LH

a - Misalignment Angle

 N/A 9 º

Approximate Brg. Weight

N/A 1.725 lb

Ultimate Radial Static Load Capacity

 N/A 101,400 lb

Fatique Load

 N/A 28,600 lb

Axial Proof Load

 N/A 3,570 lb

No Load Rotational Breakaway Torque

 N/A 1 to 24 in·lb

Note

 N/A For dimensional tolerances of listed features, see the PDF version of the catalog under the "View Product Catalogs" tab from the home page.