Batch CAD Cart (0)
  • Cart is empty
    The ADB (Aluminum Double Beam) Series coupling enhances the beam coupling options available from Lovejoy Inc. The longer overall length allows the ADB series to span longer BSE (between shaft end) measurements.

    The aluminum material used in its construction keeps the coupling’s weight low. The ADB design offers two flex points allowing for greater angular misalignment, up to 7°. This design also allows for up to .024 inches of parallel misalignment. The torque capacity ADB series is more than double the range of the single beam designs, with the largest size having a torque capacity of 88 in-lbs.
Unit of Measure

Specifications

Description 

N/A ADB4 BEAM CPLG 3/8X3/8

Coupling Size

N/A ADB4

Type

N/A Double Beam Coupling

Material

N/A Aluminum

Style

N/A Clamp Screw

Finish

N/A Anodized Aluminum

Weight

N/A 0.02 oz

Weight (Complete Coupling w/ Min. Bores)

N/A 0.60 oz

Dimensional Data

Bore A

N/A 0.375 in

Bore B

N/A 0.375 in

Overall Length

N/A 1.043 in26.50 mm

Keyway Size

N/A No Keyway

Outside Diameter

N/A 0.752 in19.10 mm

Min. Bore (Dimensions ID1/ID2)

N/A 0.236 in6 mm

Max. Bore (Dimensions ID1/ID2)

N/A 0.394 in10.00 mm

Length thru Bore

N/A 0.256 in6.50 mm

Clamp Screw Size

N/A M2.5

Cubic inches

N/A 0.58982 in³

Performance Data

Max. Operating Temperature

N/A 200.00 ºF

Max. Speed

N/A 10000 rpm

Nominal Torque

N/A 12.00 in·lb

Max. Angular Misalignment

N/A 7.00 º

Axial Misalignment

N/A ± 0.010 in

Parallel Misalignment

N/A 0.010 in

Moment of Inertia

N/A 0.0030 lb·in²

Torsional Stiffness

N/A 4460.00 in·lb/rad

Features

Features 

N/A
  • Zero backlash design
  • Simple one piece assembly
  • Aluminum material
  • Largest amount of angular misalignment capacity

Notes

Notes 

N/A
  • Nominal torque, torsional stiffness, weight and moment of inertia are based on minimum bore size.
By clicking Submit, you consent to the personal information you provide being used in the manner as described in our Privacy Notice, including access to that information by Timken personnel who may be located outside your home country. In addition, you agree that the CAD drawings are for your personal, one-time use only, and that you will not modify or create any compilation or derivative work using the CAD drawings or distribute or display the CAD drawings on any website or other media.