Menu
Batch CAD Cart (0) ▾
  • Cart is empty
  1. Click Here for Batch Download
Request Information
RRU Type - Drop-Out Style
    The RRU Type Uniflex coupling is designed for fast, easy installation and removal without disrupting the connected shafts. This is ideal when servicing impellers, bearings and seals. The design consists of two steel hubs fastened with cap screws to a Uniflex double flange coupling (UF Type). The RRU is easily disassembled by simply removing the cap screws and sliding out the UF center spring section.
    This design offers “quick disconnect” for drop out requirements. It can also accommodate a slightly larger shaft diameter than the standard U Type.
    Note: A complete RRU Type coupling is comprised of 2 hubs, 2 hardware kits, and a UF Type center drop out section.
Unit of Measure

Specifications

Description 

 N/A RRU150-HDWR PKG

Type

 N/A Drop-Out

Material

 N/A Steel

# of Mounting Screws Required

 N/A 1

Weight

 N/A 0.20 lb

Dimensional Data

Height

 N/A 3.00 in

Depth

 N/A 1.00 in

Width

 N/A 5.00 in

Cubic inches

 N/A 15.00000 in³

Dimensional Data of Related Coupling

Size

 N/A RRU150

Set Screw Size

 N/A 3/8-16

Overall Length

 N/A 7.660 in194.56 mm

Pin Size

 N/A 0.375 in

Pin Location (Dimension SL)

 N/A 0.820 in

Min. Bore (Dimensions ID1/ID2)

 N/A 0.750 in19.00 mm

Max. Bore (Dimensions ID1/ID2)

 N/A 2.125 in54.00 mm

Dimension BC

 N/A 4.380 in111.25 mm

Dimension D

 N/A 5.000 in127.00 mm

Flange Diameter (Dimension FD)

 N/A 5.380 in136.65 mm

Dimension FL

 N/A 0.620 in15.75 mm

Dimension FL1

 N/A 0.500 in12.70 mm

Dimension HL

 N/A 2.120 in53.85 mm

Dimension S

 N/A 3.440 in87.38 mm

Performance Data of Related Coupling

Max. Torque

 N/A 1890.00 in·lb213.50 N·m

Speed

 N/A 3000 rpm

Max. Angular Offset

 N/A 3.00 º

Max. Parallel Offset

 N/A 0.041 in1.04 mm

Wind-Up Angle at Max. Torque

 N/A 0.85 º

Max. Recommended End Play

 N/A 0.040 in1.02 mm

Rated HP at 100 rpm

 N/A 3.02 hp

Coupling Design

Coupling Design

 N/A Flexible Spring Type Coupling with Exclusive Triple Wound Spring Design
    The Uniflex Coupling is an all steel, single piece coupling that solves a variety of application concerns including: high misalignment, space limitations, high temperature, and exceptionally low backlash/windup. The unique flexing center of the Uniflex consists of three opposingly wound square wire springs for forward or reverse operation. Two steel hubs are then brazed to the steel spring pack to create a durable one-piece flexible coupling.

Notes

Notes 

 N/A
  • OAL Tolerance + .19 inch.
  • Total backlash is approximately 1/3 of windup at maximum torque – consult Lovejoy Engineering for more information.
By clicking Submit, you consent to the personal information you provide being used in the manner as described in our Privacy Notice, including access to that information by Timken personnel who may be located outside your home country. In addition, you agree that the CAD drawings are for your personal, one-time use only, and that you will not modify or create any compilation or derivative work using the CAD drawings or distribute or display the CAD drawings on any website or other media.