CAD (0) ▾
  • Cart is empty
  1. Request CAD files

Key Features

  • Available in single, double and multi-row configurations, as well as proprietary sizes
  • Designed in collaboration with OE engineers to design, engineer and test bearings for premium performance in many applications
  • Power dense designs allow for heavier loads and can help extend bearing life
  • Optimized internal geometry lowers torque and operating temperatures to extend lubrication system life
  • Can be designed to withstand high-corrosive, high-temperature and vacuum or low-lubrication environments with proprietary enhancements
Request Information
Unit of Measure

Key Dimensions

Cone Part Number

 N/A JP14049

Cup Part Number

 N/A JP14010-B

Bore (d)

 N/A 140 mm5.5118 in

O.D. (D)

 N/A 195 mm7.6772 in

Width (T)

 N/A 13.000 mm5.118 in
Dynamic Radial Load Rating - 1M Revs (C1) 1 N/A 203000 N45700 lbf
Dynamic Radial Load Rating - 90M Revs (C90) 2 N/A 52700 N11800 lbf
e Factor3 N/A 0.5
K Factor 4 N/A 1.16

Series

 N/A JP14000
Y Factor 5 N/A 1.19

Other Dimensions

Inner Ring Width (B)

 N/A 27.000 mm1.0630 in

Outer Ring Width (C)

 N/A 21.000 mm0.8268 in

Outer Ring Flange O.D.(D1)

 N/A 202.000 mm7.9528 in

Outer Ring Flange Width (C2)

 N/A 5.000 mm0.1969 in
Effective Center Location6 N/A 11.9 mm0.47 in
Max Shaft Fillet Radius7 N/A 3.050 mm0.12 in

Shaft Backing Shoulder Diameter - Frontface (da)

 N/A 148 mm5.83 in

Shaft Backing Shoulder Diameter - Backface (db)

 N/A 153 mm6.02 in

Housing Backing Shoulder Diameter - Frontface (Da)

 N/A 198.12 mm7.83 in
Max Housing Fillet Radius8 N/A 3 mm0.12 in

Cage Location Relative to Frontface (Ab) 

 N/A 4.8 mm0.19 in

Cage Location Relative to Backface (Aa)

 N/A 2 mm0.08 in

Weight

 N/A 2.4 Kg5.3 lb

Ratings

Dynamic Axial Rating - 90M Revs (Ca90)9 N/A 45400 N10200 lbf

Static Radial Load Rating (C0)

 N/A 304000 N68400 lbf

Factors

G1 Factor 

 N/A 220

G2 Factor 

 N/A 68.1
Geometry Factor (Cg) 10 N/A 0.113
  • 1 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 2 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
  • 3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 4 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 5 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 6 Negative value indicates effective center inside cone backface.
  • 7 These maximum fillet radii will be cleared by the bearing corners.
  • 8 These maximum fillet radii will be cleared by the bearing corners.
  • 9 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 10 Geometry constant for Lubrication Life Adjustment Factor a3l.