CAD (0) ▾
  • Cart is empty
  1. Request CAD files
This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.
Request Information
Unit of Measure

Other Dimensions

Weight

 N/A 15.400 Kg33.90 lb

Inner Ring Width (B)

 N/A 62 mm2.4409 in
Max Shaft Fillet Radius1 N/A 9.65 mm0.38 in

Shaft Backing Shoulder Diameter - Frontface (da)

 N/A 214.6 mm8.45 in

Shaft Backing Shoulder Diameter - Backface (db)

 N/A 235 mm9.25 in

Cage Location Relative to Frontface (Ab) 

 N/A 7.1 mm0.28 in

Cage Location Relative to Backface (Aa)

 N/A 3.8 mm0.15 in
Effective Center Location2 N/A 8.1 mm0.32 in

Key Dimensions

Series

 N/A HM840400

Cone Part Number

 N/A JHM840449A

Bore (d)

 N/A 200 mm7.874 in
Dynamic Radial Load Rating - 90M Revs (C90) 3 N/A 180000 N40500 lbf
Dynamic Radial Load Rating - 1M Revs (C1) 4 N/A 695000 N156000 lbf
C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)5 N/A 1210000 N272000 lbf
Dynamic Radial Load Rating 2-Row - 90M Revs (C90-2row) 6 N/A 314000 N70500 lbf
K Factor 7 N/A 1.12

Ratings

Static Radial Load Rating (C0)

 N/A 1280000 N287000 lbf
Ca90 - Dynamic Thrust Rating (90 million revolutions)8 N/A 161000 N36200 lbf

Factors

G1 Factor

 N/A 853.6

G2 Factor

 N/A 126.4
Geometry Factor (Cg)9 N/A 0.143
  • 1 These maximum fillet radii will be cleared by the bearing corners.
  • 2 Negative value indicates effective center inside cone backface.
  • 3 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
  • 4 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 5 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 6 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 7 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 8 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 9 Geometry constant for Lubrication Life Adjustment Factor a3l.