CAD (0) ▾
  • Cart is empty
  1. Request CAD files
This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.
Request Information
Unit of Measure

Other Dimensions

Weight

 N/A 2.1 Kg4.7 lb

Inner Ring Width (B)

 N/A 34.000 mm1.3386 in
Max Shaft Fillet Radius1 N/A 3.050 mm0.12 in

Shaft Backing Shoulder Diameter - Frontface (da)

 N/A 99 mm3.9 in

Shaft Backing Shoulder Diameter - Backface (db)

 N/A 106 mm4.17 in

Cage Location Relative to Frontface (Ab) 

 N/A 4.6 mm0.18 in

Cage Location Relative to Backface (Aa)

 N/A 1.5 mm0.06 in
Effective Center Location2 N/A -2 mm-0.08 in

Key Dimensions

Series

 N/A M718100

Cone Part Number

 N/A JM718149

Bore (d)

 N/A 90 mm3.5433 in
Dynamic Radial Load Rating - 90M Revs (C90) 3 N/A 57700 N13000 lbf
Dynamic Radial Load Rating - 1M Revs (C1) 4 N/A 222000 N50000 lbf
C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)5 N/A 387000 N87000 lbf
Dynamic Radial Load Rating 2-Row - 90M Revs (C90-2row) 6 N/A 100000 N22600 lbf
K Factor 7 N/A 1.31

Ratings

Static Radial Load Rating (C0)

 N/A 313000 N70500 lbf
Ca90 - Dynamic Thrust Rating (90 million revolutions)8 N/A 43900 N9860 lbf

Factors

G1 Factor

 N/A 138

G2 Factor

 N/A 35.1
Geometry Factor (Cg)9 N/A 0.0946
  • 1 These maximum fillet radii will be cleared by the bearing corners.
  • 2 Negative value indicates effective center inside cone backface.
  • 3 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
  • 4 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 5 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 6 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 7 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 8 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 9 Geometry constant for Lubrication Life Adjustment Factor a3l.