CAD (0) ▾
  • Cart is empty
  1. Request CAD files
This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.
Request Information
Unit of Measure

Other Dimensions

Inner Ring Width (B)

 N/A 18 mm0.7087 in
Max Shaft Fillet Radius1 N/A 0.3 mm0.010 in

Shaft Backing Shoulder Diameter - Backface (db)

 N/A 31 mm1.22 in

Cage Location Relative to Frontface (Ab) 

 N/A 1.3 mm0.05 in

Cage Location Relative to Backface (Aa)

 N/A 2 mm0.08 in
Effective Center Location2 N/A -3 mm-0.12 in

Key Dimensions

Cone Part Number

 N/A X32205-B

Bore (d)

 N/A 25 mm0.9843 in
Dynamic Radial Load Rating - 90M Revs (C90) 3 N/A 12200 N2740 lbf
C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)4 N/A 81800 N18400 lbf
Dynamic Radial Load Rating 2-Row - 90M Revs (C90-2row) 5 N/A 21200 N4770 lbf
K Factor 6 N/A 1

Ratings

Ca90 - Dynamic Thrust Rating (90 million revolutions)7 N/A 12200 N2740 lbf
  • 1 These maximum fillet radii will be cleared by the bearing corners.
  • 2 Negative value indicates effective center inside cone backface.
  • 3 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
  • 4 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 5 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 6 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 7 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.