CAD (0) ▾
  • Cart is empty
  1. Request CAD files
This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.
Request Information
Unit of Measure

Other Dimensions

Weight

 N/A 16.99 Kg37.45 lb

Inner Ring Width (B)

 N/A 80 mm3.1496 in
Max Shaft Fillet Radius1 N/A 4 mm0.16 in

Shaft Backing Shoulder Diameter - Frontface (da)

 N/A 136 mm5.35 in

Shaft Backing Shoulder Diameter - Backface (db)

 N/A 143 mm5.63 in

Cage Location Relative to Frontface (Ab) 

 N/A 6.6 mm0.26 in

Cage Location Relative to Backface (Aa)

 N/A 12.4 mm0.49 in
Effective Center Location2 N/A -27.9 mm-1.1 in

Key Dimensions

Series

 N/A 32322

Cone Part Number

 N/A X32322M

Bore (d)

 N/A 110 mm4.3307 in
Dynamic Radial Load Rating - 90M Revs (C90) 3 N/A 197000 N44300 lbf
Dynamic Radial Load Rating - 1M Revs (C1) 4 N/A 760000 N171000 lbf
C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)5 N/A 1320000 N298000 lbf
Dynamic Radial Load Rating 2-Row - 90M Revs (C90-2row) 6 N/A 343000 N77200 lbf
K Factor 7 N/A 1.69

Ratings

Static Radial Load Rating (C0)

 N/A 1020000 N229000 lbf
Ca90 - Dynamic Thrust Rating (90 million revolutions)8 N/A 116000 N26200 lbf

Factors

G1 Factor

 N/A 400.6

G2 Factor

 N/A 44.5
Geometry Factor (Cg)9 N/A 0.116
  • 1 These maximum fillet radii will be cleared by the bearing corners.
  • 2 Negative value indicates effective center inside cone backface.
  • 3 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
  • 4 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 5 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 6 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 7 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 8 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 9 Geometry constant for Lubrication Life Adjustment Factor a3l.