CAD (0) ▾
  • Cart is empty
  1. Request CAD files

Key Features

  • Available in single, double and multi-row configurations, as well as proprietary sizes
  • Designed in collaboration with OE engineers to design, engineer and test bearings for premium performance in many applications
  • Power dense designs allow for heavier loads and can help extend bearing life
  • Optimized internal geometry lowers torque and operating temperatures to extend lubrication system life
  • Can be designed to withstand high-corrosive, high-temperature and vacuum or low-lubrication environments with proprietary enhancements
Request Information
Unit of Measure

Key Dimensions

Cone Part Number

 N/A JM205149AS

Cup Part Number

 N/A JM205110

Bore (d)

 N/A 50.000 mm1.9685 in

O.D. (D)

 N/A 90.000 mm3.5433 in

Width (T)

 N/A 28.000 mm1.1024 in
Dynamic Radial Load Rating - 1M Revs (C1) 1 N/A 147000 N33000 lbf
Dynamic Radial Load Rating - 90M Revs (C90) 2 N/A 38000 N8540 lbf
e Factor 3 N/A 0.33
K Factor 4 N/A 1.78

Series

 N/A M205100
Y Factor 5 N/A 1.82

Other Dimensions

Inner Ring Width (B)

 N/A 28.000 mm1.1024 in

Outer Ring Width (C)

 N/A 23.000 mm0.9055 in
Effective Center Location6 N/A -7.6 mm-0.3 in
Max Shaft Fillet Radius7 N/A 2.540 mm0.1 in
Max Housing Fillet Radius8 N/A 2.54 mm0.1 in

Shaft Backing Shoulder Diameter - Frontface (da)

 N/A 57 mm2.24 in

Shaft Backing Shoulder Diameter - Backface (db)

 N/A 63 mm2.48 in

Housing Backing Shoulder Diameter - Frontface (Da)

 N/A 85.1 mm3.39 in

Housing Backing Shoulder Diameter - Backface (Db)

 N/A 80.01 mm3.15 in

Cage Location Relative to Backface (Aa)

 N/A 0.3 mm0.01 in

Cage Location Relative to Frontface (Ab) 

 N/A 2.8 mm0.11 in

Weight

 N/A 0.70 Kg1.6 lb

Ratings

Dynamic Axial Rating - 90M Revs (Ca90)9 N/A 21400 N4810 lbf

Static Radial Load Rating (C0)

 N/A 154000 N34600 lbf

Factors

G1 Factor

 N/A 48.2

G2 Factor

 N/A 15.2
Geometry Factor (Cg)10 N/A 0.0885
  • 1 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 2 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
  • 3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 4 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 5 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 6 Negative value indicates effective center inside cone backface.
  • 7 These maximum fillet radii will be cleared by the bearing corners.
  • 8 These maximum fillet radii will be cleared by the bearing corners.
  • 9 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 10 Geometry constant for Lubrication Life Adjustment Factor a3l.