CAD (0) ▾
  • Cart is empty
  1. Request CAD files

Key Features

  • Available in single, double and multi-row configurations, as well as proprietary sizes
  • Designed in collaboration with OE engineers to design, engineer and test bearings for premium performance in many applications
  • Power dense designs allow for heavier loads and can help extend bearing life
  • Optimized internal geometry lowers torque and operating temperatures to extend lubrication system life
  • Can be designed to withstand high-corrosive, high-temperature and vacuum or low-lubrication environments with proprietary enhancements
Request Information
Unit of Measure

Key Dimensions

Cone Part Number

 N/A X32060X

Cup Part Number

 N/A Y32060X

Bore (d)

 N/A 300 mm11.811 in

O.D. (D)

 N/A 460 mm18.1102 in

Width (T)

 N/A 100.000 mm3.9370 in
Dynamic Radial Load Rating - 1M Revs (C1) 1 N/A 1730000 N389000 lbf
Dynamic Radial Load Rating - 90M Revs (C90) 2 N/A 449000 N101000 lbf
e Factor 3 N/A 0.43
K Factor 4 N/A 1.34

Series

 N/A 32060X
Y Factor 5 N/A 1.38

Other Dimensions

Inner Ring Width (B)

 N/A 100 mm3.937 in

Outer Ring Width (C)

 N/A 74 mm2.9134 in
Effective Center Location6 N/A -1.8 mm-0.07 in
Max Shaft Fillet Radius7 N/A 5 mm0.2 in
Max Housing Fillet Radius8 N/A 4 mm0.16 in

Shaft Backing Shoulder Diameter - Frontface (da)

 N/A 323 mm12.72 in

Shaft Backing Shoulder Diameter - Backface (db)

 N/A 336 mm13.23 in

Housing Backing Shoulder Diameter - Frontface (Da)

 N/A 439 mm17.28 in

Housing Backing Shoulder Diameter - Backface (Db)

 N/A 423 mm16.65 in

Cage Location Relative to Backface (Aa)

 N/A 11.7 mm0.46 in

Cage Location Relative to Frontface (Ab) 

 N/A 6.9 mm0.27 in

Weight

 N/A 56.32 Kg124.2 lb

Ratings

Dynamic Axial Rating - 90M Revs (Ca90)9 N/A 334000 N75100 lbf

Static Radial Load Rating (C0)

 N/A 3170000 N712000 lbf

Factors

G1 Factor

 N/A 2353.5

G2 Factor

 N/A 203.9
Geometry Factor (Cg)10 N/A 0.189
  • 1 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 2 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
  • 3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 4 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 5 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 6 Negative value indicates effective center inside cone backface.
  • 7 These maximum fillet radii will be cleared by the bearing corners.
  • 8 These maximum fillet radii will be cleared by the bearing corners.
  • 9 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 10 Geometry constant for Lubrication Life Adjustment Factor a3l.