CAD (0)
▾
Unit of Measure
Key Dimensions
Cone Part Number |
N/A HM252349NA |
Cup Part Number |
N/A HM252311D |
Design Unit |
N/A Inch |
Bore (d) |
N/A 10.25 in260.35 mm |
O.D. (D) |
N/A 16.625 in422.275 mm |
| Dynamic Radial Load Rating 2-Row - 90M Revs (C90-2row)1 | N/A 157000 lbf698000 N |
| K Factor 2 | N/A 1.76 |
| e Factor 3 | N/A 0.33 |
Other Dimensions
T - Bearing Width across Cones |
N/A 6.8125 in173.038 mm |
| Max Shaft Fillet Radius4 | N/A 0.25 in6.4 mm |
| Max Housing Fillet Radius5 | N/A 0.06 in1.5 mm |
Outer Ring Width (C) |
N/A 5.0625 in128.588 mm |
Shaft Backing Shoulder Diameter - Backface (db) |
N/A 11.46 in291.0 mm |
Housing Backing Shoulder Diameter - Frontface (Da) |
N/A 15.79 in399.54 mm |
Weight |
N/A 190.86 lb86.59 Kg |
- 1 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
- 2 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
- 3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
- 4 These maximum fillet radii will be cleared by the bearing corners.
- 5 These maximum fillet radii will be cleared by the bearing corners.
- 6 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
- 7 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
- 8 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
- 9 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
