CAD (0)
▾
Unit of Measure
Key Dimensions
Cone Part Number |
N/A NA56393SW |
Cup Part Number |
N/A 56649D |
Design Unit |
N/A Inch |
Bore (d) |
N/A 3.9360 in99.975 mm |
O.D. (D) |
N/A 6.4951 in164.976 mm |
| Dynamic Radial Load Rating 2-Row - 90M Revs (C90-2row)1 | N/A 23000 lbf102000 N |
| K Factor 2 | N/A 1.18 |
| e Factor 3 | N/A 0.5 |
Other Dimensions
T - Bearing Width across Cones |
N/A 3.5 in88.9 mm |
| Max Shaft Fillet Radius4 | N/A 0.14 in3.5 mm |
| Max Housing Fillet Radius5 | N/A 0.03 in0.8 mm |
Outer Ring Width (C) |
N/A 2.5 in63.5 mm |
Shaft Backing Shoulder Diameter - Backface (db) |
N/A 4.61 in117 mm |
Housing Backing Shoulder Diameter - Frontface (Da) |
N/A 6.3 in160 mm |
Weight |
N/A 15.899 lb7.22 Kg |
- 1 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
- 2 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
- 3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
- 4 These maximum fillet radii will be cleared by the bearing corners.
- 5 These maximum fillet radii will be cleared by the bearing corners.
- 6 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
- 7 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
- 8 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
- 9 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
